What did you do to your NBS GMT800 Tahoe/Yukon Today?

[05Single]

U know wut i meant .... stop being dumb ...

No I thought it was rubber till I pulled off the mirror. Foam is all squished up.
But I do have seals from a set of doors I bought a few weeks ago off a 06 silvy, so I'll slap them on this weekend and see if that does anything .

 

[Rocket Man]

Dremel tool is my best friend. Does take time though, doesnt cut like butter, but it does the job.

I use a 4 1/2” angle grinder with a cut off wheel. Cuts great.

 

[HiHoeSilver]

You can just cut the plug off your old shifter, cut the one off the new shifter, and solder the old plug on the new shifter. The wire colors old and new are the same, then just tape off the 2 new wires you dont need. The + and - buttons will never get used, they have a specific resistance built in that’s only useful for the 6l80 trans. I’ve never heard of anyone being able to repurpose those buttons.

Never say never.

 

[Tonyrodz]

Went out for a smoke today.

 

[Isaiah W]

Completed all lighting mods I want...for now. I think this is considered the 10-HI mod? I don't even know...every possible light is on haha.

 

[06JET]

Removed the old UCA's today. Took some creative effort. Got both new UCA's and new lower ball joints with all new steering parts to install.

 

[73impala]

Snapped a picture of her leaving for work today

IMG_3421-2 by James Pate, on Flickr

 

[Rocket Man]

Removed the old UCA's today. Took some creative effort. Got both new UCA's and new lower ball joints with all new steering parts to install.


View attachment 205987 View attachment 205985 View attachment 205986

What did you use, dynamite?

 

[brian.roberts.1293]

Hey guys anyone recommend a good led 9005 bulb for me to use? Any links would be greatly welcomed.

Sent from my SM-N960U using Tapatalk

 

[inmypassatlife]

I got mine running, $1600 later. Got me a used axle from LKQ, HD build trans, and a new rear main seal. Not bad if you ask me, seen plenty of y'all pay that just for a stock trans rebuild.