What did you do to your NBS GMT800 Tahoe/Yukon Today?

[M1Gunner]

Do have more detailed photos of the led strips installed, I need to do something about mine ASAP.

And I finally got to wash it and since I was at it I polished the grille, bumper, and the headlights.View attachment 212556View attachment 212557 View attachment 212558View attachment 212559 View attachment 212560

Man that thing is a beast! What setup you runnin lift&tires?

 

[00'BlueSteel]

Man that thing is a beast! What setup you runnin lift&tires?

375/65r16s
16x10s
1.25” front spacers
2” rear spacers

You helped me decide to go that way, we talked about your setup and the whole tire poke thing, running 15 wides on 9” runs. I still want the old school 18x12s w/ 33x15.50s. Closest I’ve found is custom 16x16 wheels and swamped 35/16r16s

 

[eand28]

375/65r16s
16x10s
1.25” front spacers
2” rear spacers

You helped me decide to go that way, we talked about your setup and the whole tire poke thing, running 15 wides on 9” runs. I still want the old school 18x12s w/ 33x15.50s. Closest I’ve found is custom 16x16 wheels and swamped 35/16r16s

Check out TJ Forged. Bringing back the old school sizes. Started by Taylor Weld who used to be the president of Weld Racing like 12 years ago

 

[TheAutumnWind]

Had it towed home for a no-crank issue. Now lets play guess the wiring issue. Yay.

Probably grounds. Id start there.

 

[TheAutumnWind]

Crap i have to do my oil cooler lines now. They are definitely weeping and seem to be leaking @ the connection to the block. Any tips?


I've been noticing a a leak so I bypassed the rad for the transmission lines (got rid of the leaking fittings and crimps) and found out my oil cooler lines and transmission pan gasket are also leaking. Not very happy.

View attachment 212403

*Well shit. Not a fan of the bypass. Temps are higher even with ambients in the 65* range it just takes much longer to get it up to temp. * My trans cooler is much bigger and thicker than stock too...

I know the pt.net guys run big stalls with a trukool 40k so i figured id be ok. Damnit. Ill have to undelete the rad soon.


Edit: might be ok actually. Turned out it was leaking once it got up to temp bc i had a clamp that was not tight enough.

 

[Tonyrodz]

Do have more detailed photos of the led strips installed, I need to do something about mine ASAP.

And I finally got to wash it and since I was at it I polished the grille, bumper, and the headlights.View attachment 212556View attachment 212557 View attachment 212558View attachment 212559 View attachment 212560

First pic, that blue looks amazing!

 

[Tonyrodz]

375/65r16s
16x10s
1.25” front spacers
2” rear spacers

You helped me decide to go that way, we talked about your setup and the whole tire poke thing, running 15 wides on 9” runs. I still want the old school 18x12s w/ 33x15.50s. Closest I’ve found is custom 16x16 wheels and swamped 35/16r16s

Wow, 16x16's!

 

[TheAutumnWind]

Do have more detailed photos of the led strips installed, I need to do something about mine ASAP.

And I finally got to wash it and since I was at it I polished the grille, bumper, and the headlights.View attachment 212556View attachment 212557 View attachment 212558View attachment 212559 View attachment 212560

That is a lot of tire! What tie rods/steering setup you running?

 

[00'BlueSteel]

Check out TJ Forged. Bringing back the old school sizes. Started by Taylor Weld who used to be the president of Weld Racing like 12 years ago

Nice, I’ll have to look them up.

First pic, that blue looks amazing!

That’s how it looks in the sun, I need to get more pics like that.

That is a lot of tire! What tie rods/steering setup you running?

I’ve got the Cognito idler pivot assembly upgrade, Cognito heim joint tie-rods, RedHead HD Steering box, and I put new AC Delco pitman and idler arms on when we did the lift.

I don’t have a good photo of the idler assembly and center or the gear box, O have to grab some tomorrow and put them in my build thread, here you can see tie-rods.

 

[HiHoeSilver]

Nice, I’ll have to look them up.



That’s how it looks in the sun, I need to get more pics like that.



I’ve got the Cognito idler pivot assembly upgrade, Cognito heim joint tie-rods, RedHead HD Steering box, and I put new AC Delco pitman and idler arms on when we did the lift.

I don’t have a good photo of the idler assembly and center or the gear box, O have to grab some tomorrow and put them in my build thread, here you can see tie-rods.
View attachment 212590

Needs moar rust...