What did you do to your NBS GMT800 Tahoe/Yukon Today?

[mountie]

^^Let you know. Only drove it around the block, seemed good though.

( rear sagging after loading).....

Hmmm..... I loaded my '05 Yukon XL to the gills about 6 months ago. It only lowered 1 1/2" inches.

( I believe the top of fender skirt was 37.5 inches, then loaded, to 36 inches.)
Something like that...

 

[TEXCHEVY]

Oil change w/ Mobil1 full synthetic. New dash cam and parking lights installed.View attachment 267996View attachment 267997

 

[TEXCHEVY]

I replaced some bulbs in the window switches and other pieces last week and didn’t have pics so here they are. I had to replace one again tonight, not sure why but it burned out and melted the diffuser at the same time. It’s tedious as hell. Not recommended in 99-02. I hear the 03-06’s are better, it’s a different design.

View attachment 268018 View attachment 268019 View attachment 268020 View attachment 268021

precision work

 

[mwilson62000]

( rear sagging after loading).....

Hmmm..... I loaded my '05 Yukon XL to the gills about 6 months ago. It only lowered 1 1/2" inches.

( I believe the top of fender skirt was 37.5 inches, then loaded, to 36 inches.)
Something like that...

Good to know. Thanks. The issue was with the normal duty springs I was just over 36” not loaded. now I’m up at about 37.5. What shocks/springs do you have on the rear? Previous owner just put KYB Gas-adjust shocks on it before I bought it. Not sure if it had Nivomat from the factory or not. It’s ZW7 premium ride, but no G65 rpo code.

 

[mountie]

Good to know. Thanks. The issue was with the normal duty springs I was just over 36” not loaded. now I’m up at about 37.5. What shocks/springs do you have on the rear? Previous owner just put KYB Gas-adjust shocks on it before I bought it. Not sure if it had Nivomat from the factory or not. It’s ZW7 premium ride, but no G65 rpo code.

I have the ZW7 premium ride / Nivomat...... The rears look original.... but seem to still perform good even with 150,000 miles.
I would like to firm up the sway. Though, the turning does seem pretty good. ( I ALWAYS want to improve the handling )

On another note.... I checked out the headlights..... They mention "Denali" with the Yukon.
I will call them to confirm the fit ( picture they show may be a reference picture?)

 

[mwilson62000]

Correct, I think these are technically for Denali’s, as they have the projector for the low beam. No fitment issues at all.

 

[Rocket Man]

I have the ZW7 premium ride / Nivomat...... The rears look original.... but seem to still perform good even with 150,000 miles.
I would like to firm up the sway. Though, the turning does seem pretty good. ( I ALWAYS want to improve the handling )

On another note.... I checked out the headlights..... They mention "Denali" with the Yukon.
I will call them to confirm the fit ( picture they show may be a reference picture?)

Denali headlights fit the regular Yukon’s.

 

[GJones]

Got the windows tinted. And honestly kinda wish I went 15% all around instead of 20.
Also apparently this sub wanted to escape from the box. Had to turn it at an angle and rescrew it in.

Got a raise at work so HOPEFULLY I can actually put some money away to do more work on this girl.


Sent from my iPhone using Tapatalk

 

[Rocket Man]

Got the windows tinted. And honestly kinda wish I went 15% all around instead of 20.
Also apparently this sub wanted to escape from the box. Had to turn it at an angle and rescrew it in.

Got a raise at work so HOPEFULLY I can actually put some money away to do more work on this girl.


Sent from my iPhone using Tapatalk

Congrats on the raise.

 

[08grey]

Congrats on the raise.[emoji106]

I felt the same way when I did the xpel tint this fall. I wish I did the 15% up front

Sent from my SM-G973U1 using Tapatalk