What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

iddqd

Full Access Member
Joined
Dec 18, 2017
Posts
224
Reaction score
651
Location
San Francisco, Comifornia, USSA
Man I need to clean my seat belts again, and do a better job this time. It’s just such a PIA.

Try to take the seat out this time and do as I've done if u can accomodate that. Removing the seat is just 4 blots and 2 nuts, but u can wash the seatbelts in the sink with a very hot water, washing detergent, go with a brush and rinse it properly. I actually left it soak with the detergent for a night. It's a boring job, but the result is amazing!
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,006
Reaction score
50,869
Location
Oregon
Try to take the seat out this time and do as I've done if u can accomodate that. Removing the seat is just 4 blots and 2 nuts, but u can wash the seatbelts in the sink with a very hot water, washing detergent, go with a brush and rinse it properly. I actually left it soak with the detergent for a night. It's a boring job, but the result is amazing!
Yeah, that’s what I mean by a PIA. I did it with the seats in and I know I need to pull them. I’ve done that when replacing the leather. It’s not the bolts, it’s carrying them in the house. They’re awkward and a bit heavy for an old dude like me. I don’t need to tweak my back.
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,702
Reaction score
47,420
Location
Central Jersey
Yeah, that’s what I mean by a PIA. I did it with the seats in and I know I need to pull them. I’ve done that when replacing the leather. It’s not the bolts, it’s carrying them in the house. They’re awkward and a bit heavy for an old dude like me. I don’t need to tweak my back.
The older you get, the heavier shit gets!
 

fasteddy

Full Access Member
Joined
Dec 19, 2015
Posts
377
Reaction score
541
Today I put in a new throttle body.....Amazon $70. Says it has upgraded electronics and actuator for better throttle response and longevity.
Longevity? LOL the first one lasted 18 years....and maybe it was bad. Computer was throwing a TPS code and went into reduced power mode...twice, I hate those
reduced power mode codes. So we'll see if the TB was it. Hopefully not the pedal as I hate going under there.

IMG_3002.JPG

And while I was there I did the infamous throttle body coolant bypass mod with this little piece I got from home depot, $2 LOL (1/4 inch, barbed)
Guaranteed to reduce TB temp by 15-20 degrees......reduced IATs may vary based on application but should be lower.

IMG_2994.JPG IMG_2996.JPG
 

iddqd

Full Access Member
Joined
Dec 18, 2017
Posts
224
Reaction score
651
Location
San Francisco, Comifornia, USSA
Yeah, that’s what I mean by a PIA. I did it with the seats in and I know I need to pull them. I’ve done that when replacing the leather. It’s not the bolts, it’s carrying them in the house. They’re awkward and a bit heavy for an old dude like me. I don’t need to tweak my back.
Yeah, I had to ask for help to bring the seat upstairs. I'd scatch and destoy all dry walls around the stairs if I attempted to do it on my own.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,006
Reaction score
50,869
Location
Oregon
Today I put in a new throttle body.....Amazon $70. Says it has upgraded electronics and actuator for better throttle response and longevity.
Longevity? LOL the first one lasted 18 years....and maybe it was bad. Computer was throwing a TPS code and went into reduced power mode...twice, I hate those
reduced power mode codes. So we'll see if the TB was it. Hopefully not the pedal as I hate going under there.

View attachment 274288

And while I was there I did the infamous throttle body coolant bypass mod with this little piece I got from home depot, $2 LOL (1/4 inch, barbed)
Guaranteed to reduce TB temp by 15-20 degrees......reduced IATs may vary based on application but should be lower.

View attachment 274289 View attachment 274290
It doesn’t do anything. That’s an old wives tale. I did it anyway though, just to make removing the TB easier.
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,702
Reaction score
47,420
Location
Central Jersey
Today I put in a new throttle body.....Amazon $70. Says it has upgraded electronics and actuator for better throttle response and longevity.
Longevity? LOL the first one lasted 18 years....and maybe it was bad. Computer was throwing a TPS code and went into reduced power mode...twice, I hate those
reduced power mode codes. So we'll see if the TB was it. Hopefully not the pedal as I hate going under there.

View attachment 274288

And while I was there I did the infamous throttle body coolant bypass mod with this little piece I got from home depot, $2 LOL (1/4 inch, barbed)
Guaranteed to reduce TB temp by 15-20 degrees......reduced IATs may vary based on application but should be lower.

View attachment 274289 View attachment 274290
Which brand tb did you go with? Have you checked your grounds? Especially on the ds frame rail under the running board.
 

Forum statistics

Threads
132,707
Posts
1,872,925
Members
97,526
Latest member
stking
Top