What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Sam Harris

Supporting Member
Joined
Sep 26, 2018
Posts
7,427
Reaction score
14,911
Location
Texas
So after doing my oil cooler blockoff, I do still have a small leak. I will need to do the oil pan.. I could have sworn there was a Lubelocker for the oil pan, but looking at their site, I’m only seeing trans and rear diffs. So any suggestions for best quality oil pan gasket are appreciated. Probably just whatever OEM is I suppose, but throwing it out there in case of other options..
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,004
Reaction score
50,862
Location
Oregon
So after doing my oil cooler blockoff, I do still have a small leak. I will need to do the oil pan.. I could have sworn there was a Lubelocker for the oil pan, but looking at their site, I’m only seeing trans and rear diffs. So any suggestions for best quality oil pan gasket are appreciated. Probably just whatever OEM is I suppose, but throwing it out there in case of other options..
IIRC I went with the Fel-Pro, but I don’t remember if it’s supposedly better than OEM or why I bought it. I think OEM is good too, they look the same except for color.
 

Dantheman1540

Full Access Member
Joined
Feb 13, 2020
Posts
4,856
Reaction score
10,502
Location
Sugar Loaf Mountain
So after doing my oil cooler blockoff, I do still have a small leak. I will need to do the oil pan.. I could have sworn there was a Lubelocker for the oil pan, but looking at their site, I’m only seeing trans and rear diffs. So any suggestions for best quality oil pan gasket are appreciated. Probably just whatever OEM is I suppose, but throwing it out there in case of other options..

I think Lube Locker is limiting themselves terribly by not offering oil pan gaskets!
 

Logan5

Member
Joined
Jul 6, 2021
Posts
95
Reaction score
308
Location
Albany, NY
Finally got my heated seats working. A wire had been sheared on the passenger side wire loom on some kind of rail. See pic. Anyone know what that is for? Looks like is slides into a sensor?

IMG_2177.JPG
 

NoReverseYukon

Full Access Member
Joined
Feb 27, 2019
Posts
600
Reaction score
1,360
Location
NE Wisconsin
So after doing my oil cooler blockoff, I do still have a small leak. I will need to do the oil pan.. I could have sworn there was a Lubelocker for the oil pan, but looking at their site, I’m only seeing trans and rear diffs. So any suggestions for best quality oil pan gasket are appreciated. Probably just whatever OEM is I suppose, but throwing it out there in case of other options..
I haven't had a leak appear yet after replacing my block-off plate gasket, but I think that if a leak does re-appear the next places to check are the oil pressure sensor and the camshaft position sensor.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,004
Reaction score
50,862
Location
Oregon
I got my new case for my ‘15 style fob. It looks new again! Also the new Boost fob came in that I don’t need after I discovered the battery was at fault. So if any of you that own the 00-02’s want a good deal, I’m selling it for $40 shipped instead of the $48.95 they go for. It’s going in the classifieds.
 

Attachments

  • 5BD250C3-7213-4C54-8A65-6F955D833DE4.jpeg
    5BD250C3-7213-4C54-8A65-6F955D833DE4.jpeg
    235.8 KB · Views: 3
  • C3110031-D5D4-4F30-977A-9FF44B269FD5.jpeg
    C3110031-D5D4-4F30-977A-9FF44B269FD5.jpeg
    196.3 KB · Views: 3
  • 0888602B-8D75-45D4-AF2B-C1574AE18735.jpeg
    0888602B-8D75-45D4-AF2B-C1574AE18735.jpeg
    172 KB · Views: 3
  • DB03F935-F7D5-4269-866A-A28CC1923B24.jpeg
    DB03F935-F7D5-4269-866A-A28CC1923B24.jpeg
    191.5 KB · Views: 3

Forum statistics

Threads
132,315
Posts
1,865,853
Members
96,908
Latest member
Boosyed96GSX
Top