latvius
Full Access Member
Controls the speed of the blower fan, usually you can tell it is bad when all your mid range settings don't work and you only have full blast or low fan speeds.What does the resistor do?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Controls the speed of the blower fan, usually you can tell it is bad when all your mid range settings don't work and you only have full blast or low fan speeds.What does the resistor do?
I can't get a good pic but it's attached to the filler neck. Follow the fill tube all the way up and there's a bolt there.Today I found a grounding strap that is going nowhere :
View attachment 441506
This is at the rear of the driver's side. It is still attached at the body mount bushing area, but I can't see where the other end is supposed to go ( Hello Wisconsin ! ).
Can anyone tell where this is should go ?
Thanks.
Thank you !I can't get a good pic but it's attached to the filler neck. Follow the fill tube all the way up and there's a bolt there.
Yeah, I need to paint my rear wiper and buy new "old style" arms for the front.I got the wiper arms reinstalled on my 06 suburban. I took them off to paint since they were so faded. I also painted the 99 Silverado and my other 04 Suburban along with a rear arm.
I tried grinding off the little "stops" on the later style arms, thinking that would allow them to fold out like the early style, but that didn't do anything. Oh well, I tried, LoL.
Yeah, I need to paint my rear wiper and buy new "old style" arms for the front.
Nice work.