What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

FlyboyTR

Member
Joined
Dec 7, 2013
Posts
42
Reaction score
7
Location
Mobile, AL (Dog River at the Steel Magnolia)
02 Yukon XL: New drivers seat bottom cover and new foam arrived from The Seat Shop. After stripping the cover and old foam, I found the seat pan frame was cracked on the left side. It looks like the repeated flexing from the driver getting in/out caused the failure. I clamped the frame to take the bend out and welded the crack. Much better.

Installed the foam and seat cover. Very nice. I am very happy with their product. However, $360 is a lot to spend on a single cover and a piece of foam!

Front door speakers were trash. Installed new Boss speakers (cheap...only $12 for the pair via Amazon.com; although I just noticed the price is now $20. Still a good deal). http://www.amazon.com/gp/product/B000J1FABY/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1 They actually sound very good. ...better than some high end speakers I had been looking at.

Third attempt at repairing the rear view mirror. It stays dark (doesn't auto darken) and can't read the temp/comp display. It appears to be working. I'll check it further today.

Pulling to the right, slightly... Getting an alignment in the morning.
 

Bomba02

Full Access Member
Joined
Mar 27, 2013
Posts
371
Reaction score
8
FINALLY got my nali back this weekend. I replaced the fuel pump. :winner_third_h4h:

This is what I took out think it was time.
D2D6580C-D326-4B80-BB27-9D6C72034D91_zps2nw70kna.jpg

I replaced it with a walbro 255, racetronix hot wire kit, new bulk head connector and pump harness, new sock. This is the bucket modded with new pump in it.
1C1FD970-5AE2-4AA2-92A4-A3371B568C22_zpsrskbcyvw.jpg

I have to say the hot wire kit was a nice piece. Plug and play not hard to run. The only thing that sucked was I had to do the job twice. Installed the 1st time and still truck would not run no fuel pressure I was pissed. Dropped the tank again to find out the per wired pump harness form pump to bulk head was wired backwards. Switched wires tested pump reinstalled and she runs great better then before. Also a new fuel filter.

On the lift
61F4E937-4C30-4AEC-9211-22C8FA19FE04_zpszdurxkj8.jpg

While I had it in the shop I put my stock tires back on!
8D7206A8-6E3A-47AD-B096-29B038E277AF_zpsj47ykhtk.jpg
They need to be plasti dipped,
Billy
 

Buck

TYF Newbie
Joined
Jul 26, 2013
Posts
16
Reaction score
7
Location
FL
Added tint to the driver and passenger door windows.

picture.jpg
 

Tahoewhat

Ballin' on a Budget
Supporting Member
Joined
Sep 20, 2009
Posts
3,720
Reaction score
24
Location
TX
Installed catch can last night and realized today w/ 6 people i need to re configure my shock treatment. I.E. other shocks.
 

a4edwin

Full Access Member
Joined
Nov 14, 2011
Posts
948
Reaction score
239
Location
ny
Swapped out alternator. Easiest thing that could possibly be done
 

Forum statistics

Threads
132,366
Posts
1,866,805
Members
96,989
Latest member
Mreedini
Top