What did you do to your NBS GMT800 Tahoe/Yukon Today?

[SRTH8R]

Power steering fluid full, tires rubbing, or belt slip would be my guess.

 

[chevync]

Idle is a little low, once I get a few hundred more miles on the newly rebuilt engine i'm taking it and having a tune put on it so they will check timing etc..

Too funny. This is one of the easiest fixes. The clunk on my burb was non stop driving me crazy.

---------- Post added at 06:16 PM ---------- Previous post was at 06:14 PM ----------



Probably power steering pump is turning to slow at low engine rpm so you lose pressure. Just keep a little more rpm on those slow full lock turns.

 

[Bomba02]

Lol, no it's nice and snug in the factory grille. I Evan thought about cutting it at the edge of the holes, but it is still loose. If that makes sence. If you want to take some measurements that would be great.

---------- Post added at 05:01 PM ---------- Previous post was at 04:57 PM ----------

I'm guessing 3 measurements would tell me if it was close. Just need inside measurements. Here is my artistic skills. Lol

Measurement A. 38 3/4
Measurement B. 37 1/8
Measurement C. 9 1/4

There is a 1/4 gab in between the honey comb grille and the out like of the grille. The honey comb grille measurement are
Measurement A. 38 3/8
Measurement B. 36 1/2
Measurement C. 8 1/2
Hopefully those measurements can help you out.

 

[SRTH8R]

Measurement A. 38 3/4
Measurement B. 37 1/8
Measurement C. 9 1/4

There is a 1/4 gab in between the honey comb grille and the out like of the grille. The honey comb grille measurement are
Measurement A. 38 3/8
Measurement B. 36 1/2
Measurement C. 8 1/2
Hopefully those measurements can help you out.

Thanks Billy, that helps a lot. I think I will order the Denali speed grille. Should be a nice fit. Worst case I will be selling one of those at a discounted price. Lol.

 

[Bomba02]

Thanks Billy, that helps a lot. I think I will order the Denali speed grille. Should be a nice fit. Worst case I will be selling one of those at a discounted price. Lol.

Glad I could help man.

 

[Mister H12]

Working on my leather seat swap, did a google search for seats.. found this. Lol

 

[Rickz04Yuk]

Working on my leather seat swap, did a google search for seats.. found this. Lol

Mines just like this for extra storage have the other seat in the garage wrapped up

 

[02 Burb]

Changed out the old, cracked front sway bar end links with moog. Took about an hour and all from start to finish.

 

[Yuko04]

Washed her and put it on the lift. Gonna change out wheel bearings and power steering pump.
Well when I get back Friday evening.

SUBLETTKUSTOMZ

 

[SRTH8R]

Installed air raid jr, and weathertech floor mats.