What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MichaelSE

2010 2500
Joined
Nov 9, 2015
Posts
412
Reaction score
126
Location
Tucson
It's been in the 20s-30s in the morning here, and it sounds like mine has developed an unfortunate case of piston slap. At least I hope it's piston slap and not something more damaging. Anyway, next oil change I'll go with Mobil 1 high mileage, which is supposed to be a bit thicker than Mobil 1 standard, and see how it sounds.
 

DaRosa218

The Dude abides
Joined
Jul 30, 2010
Posts
993
Reaction score
784
Location
Modesto, California
It's been in the 20s-30s in the morning here, and it sounds like mine has developed an unfortunate case of piston slap. At least I hope it's piston slap and not something more damaging. Anyway, next oil change I'll go with Mobil 1 high mileage, which is supposed to be a bit thicker than Mobil 1 standard, and see how it sounds.

Not everyone agrees to this however, on my 2006 I had terrible position slap. I did seafoam via PCV and it went away.
 

MichaelSE

2010 2500
Joined
Nov 9, 2015
Posts
412
Reaction score
126
Location
Tucson
Not everyone agrees to this however, on my 2006 I had terrible position slap. I did seafoam via PCV and it went away.

I'll give that a try.. which PCV did you use, the one on the airbox? And how much of the can did you suck up?
 

950410

Member
Joined
Jul 23, 2016
Posts
32
Reaction score
7
Yanked the side moldings. Looks so much cleaner. Don't be fooled by the reflection off the floor in the last pic. It looks like the paint is lighter where the molding was but you really can't tell at all that they were there.

e6685d2a613031aec6d8eb2497619160.jpg


88759f15757fbeed79b84c740ca86fd9.jpg

933c823cadc02ab08c9faa5289711b23.jpg


b3410fe13ccba4844fb8b90d2ae71009.jpg



Sent from my iPhone using Tapatalk
 

MichaelSE

2010 2500
Joined
Nov 9, 2015
Posts
412
Reaction score
126
Location
Tucson
I disconnect the Vacuum line from the brake booster and draw it up via a dixie cup. I use a half bottle when doing it

Thanks man. Did you just stick the hose in the cup and suck it up like a straw?

Just to get back on topic for what I did to my NNBS, I downloaded a GPS speedometer app that has a 0-60 and 1/4 mile timer, tried the 0-60 timer and got a result of 7.0 seconds :D I've done it a few times and got 7.1 or 7.0 each time. Obviously it's not the most accurate measurement, it uses the iPhone's GPS antenna and counts in increments of 1/10th seconds, but it was fun to try and good to know that this big beast can still hang with most new SUVs on the road.

IMG_7506.PNG
 
Last edited:

93blkongreenpro

Full Access Member
Joined
Feb 9, 2016
Posts
1,388
Reaction score
1,358
So refreshing to replace the terrible h11. Jesus.

20161203_200410.jpg

Sent from my SM-G935P using Tapatalk
 

07LTZJNAK

TYF Newbie
Joined
Nov 20, 2016
Posts
12
Reaction score
19
Subscribed to SiriusXM for Wifey (she still doesn't know about it), replaced a rear stoplight bulb, and purchased a replacement idler pulley since it is a little squeaky when cold, will replace that tomorrow along with some other minor cosmetic stuff.

Really dig this thing, almost hoping Wifey will hate it (not likely). Need to order the folding mirror replacement gears so I can get it done before Christmas.

JK
 

Fosscore

Full Access Member
Joined
Apr 16, 2014
Posts
10,520
Reaction score
18,259
So refreshing to replace the terrible h11. Jesus.

View attachment 70437

Sent from my SM-G935P using Tapatalk

@93blkongreenpro

You have a link to the bulbs you went with? Did you have any issues getting it to clip to the OEM harness when you installed the new bulbs? I ask as I tried one set and had to send them back as they would not clip in securely. Thx man.
 

Forum statistics

Threads
132,376
Posts
1,866,996
Members
97,011
Latest member
ihadtheories

Latest posts

Top