HiHoeSilver
Away!
Loaded up.
Sent from my SM-G955U using Tapatalk
Whatcha doin?
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Whatcha doin?
93blkongreenpro
Full Access Member
- Joined
- Feb 9, 2016
- Posts
- 1,388
- Reaction score
- 1,358
Turkey day stuff, and my aunt has 15 acres of land, so I got the rc trucks. But 2 18lb turkeys are brinning in the lowes buckets, deep frier and other food goodies. Few gallons of [emoji535][emoji535]White lightening and the such
Sent from my SM-G955U using Tapatalk
guy from norcal
Full Access Member
- Joined
- Jul 15, 2012
- Posts
- 622
- Reaction score
- 327
I replaced both heater hose tee's. since one decided to break off just as the wife pulled into work. Good time to replace the hoses and thermostat as well.
YA A PAIR OF VICE GRIPS ON UNTRUSTWORTHY GAS CYCLINDERS HELPS SOMETIMES
Drok
Full Access Member
Yup, Now only if id have known haha every hatchback from then on i used them even if the car was gtg or not. Lol
Drok
Full Access Member
Have a good thanksgiving guys
Fosscore
Full Access Member
- Joined
- Apr 16, 2014
- Posts
- 10,519
- Reaction score
- 18,256
07 Denali with 75k
New Centric rotors, Akeebono ProAct pads, Stoptech Stainless hoses, fluid flush and booster vacuum hose replaced just because. Also did front and rear differential fluids.
Have a buddy who works at Centric explain to me the differences from design, foundry's, etc. and why I should go with their Premium rotors which were less expensive than the AutoZone gold's I had waiting to install. Have to say I am very pleased with the Centric stuff my first time.
Also was pleasantly surprised the Stop Tech stainless lines also came with the rear inner hoses which I wasn't expecting. I want to kick the GM engineer who mounted the upper connection in the least accessible place possible tho. That wasn't very much at all. I can add part #'s later if needed
New Centric rotors, Akeebono ProAct pads, Stoptech Stainless hoses, fluid flush and booster vacuum hose replaced just because. Also did front and rear differential fluids.
Have a buddy who works at Centric explain to me the differences from design, foundry's, etc. and why I should go with their Premium rotors which were less expensive than the AutoZone gold's I had waiting to install. Have to say I am very pleased with the Centric stuff my first time.
Also was pleasantly surprised the Stop Tech stainless lines also came with the rear inner hoses which I wasn't expecting. I want to kick the GM engineer who mounted the upper connection in the least accessible place possible tho. That wasn't very much at all. I can add part #'s later if needed
iamdub
Full Access Member
After not having a good experience with my slotted cryo-tempered StopTech rotors, I'm going back to regular smooth rotors. I've read quite a few reviews on the Centric Premiums being better than the OE rotors. What's the scoop from you friend on them? Those brake lines were a 6-piece set? Part numbers on the lines and hard parts would be much appreciated.
I've done the drilled, slotted, cryo deal before without any luck as well. They look nice but think 90% are in the wrong application. I first went with AutoZone Gold High Carbon rotors for warranty and will copy n paste his info about then and Centric below. High carbon actually makes the rotor softer which was news to me.
Stoptech hoses are DOT certified and the rear set came with 4 hoses even though listings only said 2 at RockAuto
Part#'s are-
Centric Premium Coated Rotors-
120.66065, 120.66067
Stop Tech (Centric) Stainless hoses
Front-95066002
Rear-95066502
From buddy at Centric
Most of the lower end white box stuff you see in Autozone / O-reilly / wherever are similar...we actually supply a lot of it to them. When you get into the "higher end" stuff at the chain stores, it gets interesting. A lot of it is simply the white box shit with some sort of lipstick (plating/coating/paint) and a shiny box with a bunch of marketing jargon. Often times the "higher end" program is simply sourced through a different vendor that for whatever reason has the illusion of being better, even though they're not much different. Just about all production rotors any more come out of China, but like anything, they will build to whatever price point you want. Our premium stuff is cast using a fines and mold, while the economy stuff uses cheaper coarse sand. We also have casting process specs concerning core box size, cooling, etc that are not in place in many of the factories. The "high carbon" was actually started by us, we developed an alloy that was considerably softer, like OE European stuff, to work with the Euro style abrasive friction material. High Carbon was what we branded that alloy, which had considerably more to it than the standard G3000 with a couple points more carbon in the mix. Everyone else jumped on the "high carbon" bandwagon, by simply adding a bit of carbon, but the rotors aren't functionally any different than the standardG3000 iron in testing.
I'd recommend Centric Premium rotors. Assuming this is a non-XL Denali, Part numbers for the front rotors are 120.66057, rear rotors are 120.66065
Stoptech hoses are DOT certified and the rear set came with 4 hoses even though listings only said 2 at RockAuto
Part#'s are-
Centric Premium Coated Rotors-
120.66065, 120.66067
Stop Tech (Centric) Stainless hoses
Front-95066002
Rear-95066502
From buddy at Centric
Most of the lower end white box stuff you see in Autozone / O-reilly / wherever are similar...we actually supply a lot of it to them. When you get into the "higher end" stuff at the chain stores, it gets interesting. A lot of it is simply the white box shit with some sort of lipstick (plating/coating/paint) and a shiny box with a bunch of marketing jargon. Often times the "higher end" program is simply sourced through a different vendor that for whatever reason has the illusion of being better, even though they're not much different. Just about all production rotors any more come out of China, but like anything, they will build to whatever price point you want. Our premium stuff is cast using a fines and mold, while the economy stuff uses cheaper coarse sand. We also have casting process specs concerning core box size, cooling, etc that are not in place in many of the factories. The "high carbon" was actually started by us, we developed an alloy that was considerably softer, like OE European stuff, to work with the Euro style abrasive friction material. High Carbon was what we branded that alloy, which had considerably more to it than the standard G3000 with a couple points more carbon in the mix. Everyone else jumped on the "high carbon" bandwagon, by simply adding a bit of carbon, but the rotors aren't functionally any different than the standardG3000 iron in testing.
I'd recommend Centric Premium rotors. Assuming this is a non-XL Denali, Part numbers for the front rotors are 120.66057, rear rotors are 120.66065
