What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[GranPrix]

Cleaned up the center console.

 

[PG01]

Cleaned up the center console.

View attachment 192650

Hey, i know someone that needs the #’s off that wiring harness in console @Ron C

 

[Ron C]

Hey, i know someone that needs the #’s off that wiring harness in console @Ron C

Hi Pete, I have the same wiring harness in my console. I would need the one from the console that goes to the radio (if it exists). I assume it is going to the radio, don't see where else it would go.

But thank you!! I appreciate you helping out!!

Ron

 

[wendal]

This is what I just put in and they are bright. Pics in my build thread.

View attachment 78330

Hello all, I am in the midst of converting to all LED on the front of my Yukon, and I have a question about wiring. Has anyone here done a YUKON wiring in the load resistors? I'm not good with electrical testing, and I'm trying to figure out which 2 wires in my front blinkers to connect to. In the picture, you see that the blinker light has 3 incoming: 1 brown, 1 black, one green. And, it has 2 outgoing (2 the park lights), 1 brown 1 black. I want to say, via process of elimination (I don't think the park lights blink when the signal is on), that it is the black (ground) and the green (hot). But I don't know, and don't want to damage the wrong wire. Any help would be GREATLY appreciated!

 

[KBones]

Changed the colors on my camper to match..

 

[NGAneer]

Hello all, I am in the midst of converting to all LED on the front of my Yukon, and I have a question about wiring. Has anyone here done a YUKON wiring in the load resistors? I'm not good with electrical testing, and I'm trying to figure out which 2 wires in my front blinkers to connect to. In the picture, you see that the blinker light has 3 incoming: 1 brown, 1 black, one green. And, it has 2 outgoing (2 the park lights), 1 brown 1 black. I want to say, via process of elimination (I don't think the park lights blink when the signal is on), that it is the black (ground) and the green (hot). But I don't know, and don't want to damage the wrong wire. Any help would be GREATLY appreciated!View attachment 192732 View attachment 192733

I did mine and I want to say it was the brown and black. What I did was tap the wires, test the blinker, tap different wires, test the blinker. Sorry I can't be more help.

 

[GranPrix]

Dropped in my full center console today. Now I have to get rid of the jump seat I no longer need.

 

[OptCodeVoid]

Dual Batteries FTW

 

[Doubeleive]

my weekend project has arrived, I am upgrading my E fans to the HD cooling, picked up a used assembly off ebay for 199.00 with 200k on the clock and 2 new 700w motors from rock auto for $60&$40 so total cost $300, I don't trust those after market fans too many failure reports. dealer says the relays are the same so should be good to go......

 

[kbuskill]

my weekend project has arrived, I am upgrading my E fans to the HD cooling, picked up a used assembly off ebay for 199.00 with 200k on the clock and 2 new 700w motors from rock auto for $60&$40 so total cost $300, I don't trust those after market fans too many failure reports. dealer says the relays are the same so should be good to go......

View attachment 192869

What makes them HD?

I am guessing more blades than SD but I have never really paid attention to how many blades mine have.