Burb!!
Full Access Member
Just a wash and wax as always...
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
PG01
Supporting Member
Cant see it but i still liked itJust a wash and wax as always...
Burb!!
Full Access Member
fixed it, lol
Wolfbraid
Full Access Member
Filled it up with family, gas, DVDs and Drove ~1300miles RT to FL on Friday(and now back home) She did pretty well, no tighten gas cap message, no CEL. only Odd occurrence is my Cruise control wouldn't come on occasionally. and my backup lights sometimes don't illuminate when clicking "unlock" on the FOB.
Averaged about 19mpg on the way down, ran it down to 16.3 mpg while tooling around FL, on the trip back was able to pull the average back up to a 17.8 for the trip.. not the best, but I imagine pretty average for running over 70-75 most of the highway miles. that was DIC values not hand calculated.
I think the cruise control issue might be related to the brake switch code that was thrown(lights operate normally) but autozone code reader said there was an error.
Averaged about 19mpg on the way down, ran it down to 16.3 mpg while tooling around FL, on the trip back was able to pull the average back up to a 17.8 for the trip.. not the best, but I imagine pretty average for running over 70-75 most of the highway miles. that was DIC values not hand calculated.
I think the cruise control issue might be related to the brake switch code that was thrown(lights operate normally) but autozone code reader said there was an error.
ya the cruise control would be related to any brake related problem it's a safety feature so you don't just keep going 65 when you need to brake, if the cruise control detects any brake problem it wont engage
Regency
Supporting Member
- Joined
- Dec 14, 2011
- Posts
- 5,093
- Reaction score
- 664
And a fill up!
GranPrix
Full Access Member
- Joined
- Sep 10, 2017
- Posts
- 701
- Reaction score
- 473
LMFAO
so.....stupid tighten gas cap is back again, did a little research turns out the system has to fail twice to give a code, even though mine is not throwing a cel it just say's tighten gas cap
so I was under the assumption that the front solenoid would only be a small leak but this is not the case and it can cause a large leak code, I already changed the rear solenoid (which I might not have had to but is was only $49 so no biggie) I still have my old known good front solenoid and just swapped it back on and so I guess in 2 days I will know if that was the problem or not
so I was under the assumption that the front solenoid would only be a small leak but this is not the case and it can cause a large leak code, I already changed the rear solenoid (which I might not have had to but is was only $49 so no biggie) I still have my old known good front solenoid and just swapped it back on and so I guess in 2 days I will know if that was the problem or not
SWSS
Full Access Member
Just had the hood painted. Now the wife is happy... and during those 30 seconds I ordered the 3/1 Rough Country lift! Saved more by going by to pick it up in Dyersburg.
Sent from my iPhone using Tapatalk
