What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[08z71bgm]

That's happened to us, gf's phone was on the table--but it was off--not powered off, just off. We were talking about a certain type of sheet, and what do you know.....

.....when you guys went to lay down in bed the sheets magically appeared on your bed? Lol

 

[Sparksalot]

Are those really the only two options? $87 for what amounts to a giant syringe with hoses, or $8 for junk.

What about an intermediate solution like this? I'd pay $32 for a decent pump. Not sure about $87.

https://www.amazon.com/ABN-Automotive-Transfer-Syringe-Bottle/dp/B075NKV4CR/ref=sr_1_16?crid=26CW82048EE57&dchild=1&keywords=fluid+pump+automotive&qid=1605638372&s=automotive&sprefix=fluid+pump,automotive,203&sr=1-16

I've had one something like this for a couple of years. IT works well for draining the transmission through the fill tube.

https://www.amazon.com/Extractor-Sc...uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

 

[Tonyrodz]

.....when you guys went to lay down in bed the sheets magically appeared on your bed? Lol

Lol, nooo, she immediately started getting ads--didn't even wait a day!

 

[08z71bgm]

Lol, nooo, she immediately started getting ads--didn't even wait a day!

You don’t say! Did you buy the sheets from the ads tho?

 

[George B]

Deleted Duplicate

 

[George B]

Thanks. I've only seen them referred as the Ck375 as well. There's a guy on facebook with a set of 22s for sale for $900 but he claims that they're OE off his escalade. Truth be told i mostly see these on sierras/ silverados so I wasn't sure if he *** full of it or not

They're a factory Denali wheel. They could be OE off his Escalade- OE Denali wheels that he formerly had on his Escalade. Gotta read between the lines, brah.

My 13 Burb came with them from the Factory or Dealer.

 

[PG01]

My 13 Burb came with them from the Factory or Dealer.

No, original buyer prob swapped them. Factory 20” ltz rim

 

[Tonyrodz]

You don’t say! Did you buy the sheets from the ads tho?

Nope.

 

[George B]

No, original buyer prob swapped them. Factory 20” ltz rim
View attachment 262736

But the door sticker even says 22” wheels...

 

[Idriveaho]

So after sitting over night the noise fixed itself... I started it up after looking over for any bolt heads missing in the exhaust manifold. I found none. After starting I didn’t notice the clacking like in the video I posted last night. The vid I’m posting now is within a minute of a cold start at 34 degrees outside. And it got a little more quiet after warm up. Been driving now for half hour and nothing unusual.

I think I’m going to put some atf in the oil and change it soon. I forgot to mention when I put the lifters back on on the drivers side I pulled the pushrods out and cleaned them. They had a good amount of carbon. What I should of done is try to spray down the oil passage. Oh well.