What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Bigkevschopshop]

That is super clean. My fiancee wants to spiff up her Mazda 3. She wants to get it detailed and then we’ll see about adding some LED headlight bulbs and adding a factory fog light kit. After that, tint the windows

Sounds cool. Always nice when wife wants to play a bit.

 

[alpha_omega]

Question(s) for those of you who have replaced them. Engine motor mounts and “Transmission” mount.

Stick with OEM or has the community collectively found a better build quality with a different manufacturer?

If sticking with OEM - what is the difference in the ACDelco model numbers for their motor mounts (15854939 and 15854941)?

I’ve read a couple different postings on the do’s and don’ts from those who have taken on the task, but I couldn’t narrow down a specific brand since there were a few different names thrown around. Thanks.

 

[R3cord303]

Question(s) for those of you who have replaced them. Engine motor mounts and “Transmission” mount.

Stick with OEM or has the community collectively found a better build quality with a different manufacturer?

If sticking with OEM - what is the difference in the ACDelco model numbers for their motor mounts (15854939 and 15854941)?

I’ve read a couple different postings on the do’s and don’ts from those who have taken on the task, but I couldn’t narrow down a specific brand since there were a few different names thrown around. Thanks.

I went with the OEM H3 mounts on the engine that aren’t oil filled. It shakes a bit more, but my dash doesn’t rattle any longer. I don’t think my transmission mount has been replaced. Or if it has, it was with the transmission

 

[the_tool_man]

I'm having a HELL of a time getting motor mounts. I'm on vendor number 2. They're INSISTING on a VIN before they'll expedite the order with GM. This big brother draconian crap is driving me nuts. I looked up a valid VIN for an '09 Hummer H3 so it would match the motor mounts, and gave them my VIN for the transmission mounts. (holding breath)

 

[Doubeleive]

Question(s) for those of you who have replaced them. Engine motor mounts and “Transmission” mount.

Stick with OEM or has the community collectively found a better build quality with a different manufacturer?

If sticking with OEM - what is the difference in the ACDelco model numbers for their motor mounts (15854939 and 15854941)?

I’ve read a couple different postings on the do’s and don’ts from those who have taken on the task, but I couldn’t narrow down a specific brand since there were a few different names thrown around. Thanks.

engine motor mounts are recommended to be replaced with the hummer engine mounts, they are solid rubber versus the liquid filled, I do not have the part number handy but I am sure someone will post it up or link to the thread on it.

 

[the_tool_man]

I've chosen these, but have yet to successfully order them:

Motor mount [Hummer H3 solid rubber] (2): 25847739
Trans mount [GMC Yukon Denali AWD] (1): 15840278

The trans mount is no problem; stock part for my vehicle. The Hummer mounts are "on national backorder" with GM according to the sites I've used. They WILL NOT take an order without a valid VIN. Turns out, that part number is for one side (forget which). So even finding a valid VIN for a Hummer H3 gets flagged, because to them I'm ordering one of them wrong. I guess I could place separate orders, or find a second Hummer VIN. I'm going to see if RockAuto or another generic parts house has these. I'll have to pay more, but at least I'll get the parts. Sheesh.

EDIT: generic parts houses I checked are all out of stock. I guess word has gotten out on how good the H3 mounts work. I hate being the last one standing when the music stops.

 

[Kee Fuller]

Got rid of the liquid wrap and In the shop getting all the dents out, filling the holes in the roof and new black paint.

 

[Sam Harris]

Got rid of the liquid wrap and In the shop getting all the dents out, filling the holes in the roof and new black paint.

View attachment 264410 View attachment 264411

Woohoo! What’s that going to run you...?

 

[alpha_omega]

I'm having a HELL of a time getting motor mounts. I'm on vendor number 2. They're INSISTING on a VIN before they'll expedite the order with GM. This big brother draconian crap is driving me nuts. I looked up a valid VIN for an '09 Hummer H3 so it would match the motor mounts, and gave them my VIN for the transmission mounts. (holding breath)

That’s one of the problems I had, which is why I posted this question. I saw others mentioning the “Atomic” but also saw that one has some bad vibration issues.
Mine are not “broken” (as of yet), but as I am approaching 100k miles the need to change them is drawing near. Plus I currently have the exhaust manifold, plugs, wires and electrical connections all removed. So this would be as good of a time as any to do them.

 

[08z71bgm]

Oooo, a Baldwin split bumper! Sweet. They were based in NY if I remember correctly.

Baldwin New York to be exact.