What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[avalonandl]

Blue Light Special

 

[Sparksalot]

Sorry, I’m confused by your post. You set the tire pressure setting in the truck at 25 and your light comes on below 37?

That’s correct.

 

[gooffeyguy]

25 is below 37, so what's the problem? Lol

Sent from my SM-G930V using Tapatalk

 

[avalonandl]

Mine are rusted and got them out no problem. Use the right size screwdriver. Hit it with a hammer with pressure and turn it on impact. The shock breaks then loose.

Got one light changed, wd40 did the trick with the right screwdriver.

 

[sarneson91]

Been awhile posting but recently have been chasing the service stabilitrac, service traction control, service suspension, gremlin that makes the tranny have a hard 1-2 shift and the brakes pulse slowly when slowing down. At this point I’ve already bled the brakes, replaced brakes on all 4 corners, replaced front wheel speed sensors, and cleaned the contact area between sensors and axle(nobody near me has them in stock). Anyone have any suggestions as to what corrected their issues? Also I now live in Woodbridge Va (stationed in DC), anyone nearby <50 miles have a tech 2 that I can borrow to check what sensors are malfunctioning?

 

[George B]

Light didn’t come on at 29 but maybe it would take some time. Ran out of time.

Tested my new setting for the TPMS. Light comes on at 29 PSI now. That would give me a little more time to get a repair accomplished.

 

[kbuskill]

Been awhile posting but recently have been chasing the service stabilitrac, service traction control, service suspension, gremlin that makes the tranny have a hard 1-2 shift and the brakes pulse slowly when slowing down. At this point I’ve already bled the brakes, replaced brakes on all 4 corners, replaced front wheel speed sensors, and cleaned the contact area between sensors and axle(nobody near me has them in stock). Anyone have any suggestions as to what corrected their issues? Also I now live in Woodbridge Va (stationed in DC), anyone nearby <50 miles have a tech 2 that I can borrow to check what sensors are malfunctioning?

I don't have an answer for you unfortunately but this reminded me of something I was going to mention.

We should start a thread and maybe get it stickied with all the guys who have a Tech2 and would be willing to help someone out local to them with maybe just City/State or Zip code/State info so as not to reveal home addresses and such.

I'm not sure which section would be appropriate and most visible or I would start it. Maybe the "Tech" section???

BTW, thank you for your service.

 

[a4edwin]

I don't have an answer for you unfortunately but this reminded me of something I was going to mention.

We should start a thread and maybe get it stickied with all the guys who have a Tech2 and would be willing to help someone out local to them with maybe just City/State or Zip code/State info so as not to reveal home addresses and such.

I'm not sure which section would be appropriate and most visible or I would start it. Maybe the "Tech" section???

BTW, thank you for your service.

Regional section would be appropriate

 

[Fless]

Been awhile posting but recently have been chasing the service stabilitrac, service traction control, service suspension, gremlin that makes the tranny have a hard 1-2 shift and the brakes pulse slowly when slowing down. At this point I’ve already bled the brakes, replaced brakes on all 4 corners, replaced front wheel speed sensors, and cleaned the contact area between sensors and axle(nobody near me has them in stock). Anyone have any suggestions as to what corrected their issues? Also I now live in Woodbridge Va (stationed in DC), anyone nearby <50 miles have a tech 2 that I can borrow to check what sensors are malfunctioning?

Vacuum or hydroboost brakes?

Have you checked for misfires or a vacuum leak?

 

[Doubeleive]

Regional section would be appropriate

ya but nobody uses the regional section