What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Sparksalot]

I've also been trying to find pics again of rthe fan shroud trimming that needs to happen. No luck, even though I've seen several posts in the past.

 

[Monz11]

Rewiring with 1/0 gauge, anyone else run into this, under the fuse box. Whats name of this crimped end, so I can order to fit my 1/0 guage wire pls?

 

[gooffeyguy]

View attachment 359504View attachment 359505View attachment 359506View attachment 359507View attachment 359508

You'd think those would be made to not use spacers, since they're PPV/SSV and should be capable to stand up to harsher conditions.

Do all the PPV/SSV wheels use spacers on the caps, or are yours just mismatched or something?

 

[Rocket Man]

View attachment 359504View attachment 359505View attachment 359506View attachment 359507View attachment 359508

Those go behind the center caps? Seems sketch either way.

 

[Doubeleive]

View attachment 359504View attachment 359505View attachment 359506View attachment 359507View attachment 359508

Easy to make those just grab some aluminum tubing at the hardware and cut to length

 

[Doubeleive]

You'd think those would be made to not use spacers, since they're PPV/SSV and should be capable to stand up to harsher conditions.

Do all the PPV/SSV wheels use spacers on the caps, or are yours just mismatched or something?

those caps take spacers, i'm guessing reason being that way gm wouldn't have to make separate hubs for the ppv/ssv

 

[Tonyrodz]

Easy to make those just grab some aluminum tubing at the hardware and cut to length

This is what I did. Small o rings keep the spacers from falling off the bolts when the caps are dismounted.

 

[RooTBeeRthe1st]

I've also been trying to find pics again of rthe fan shroud trimming that needs to happen. No luck, even though I've seen several posts in the past.

Not great, but you'll get the idea. Hold the fans up and you'll see what needs trimming to fit.
I literally used a small wood saw because that's all I had. Got the fitment pretty darn good.

 

[RooTBeeRthe1st]

I've also been trying to find pics again of rthe fan shroud trimming that needs to happen. No luck, even though I've seen several posts in the past.

 

[RooTBeeRthe1st]

Double post oops.