What did you do to your OBS GMT400 Tahoe/Yukon Today?

[landsoul]

Put a Warn Trans4mer brush guard, new head lights and turn signals. I went with the OEM headlights and signals.

 

[Gzes]

Nice little guard guessing it's a 3 piece? Get to do cap rotor and thermostat tomorrow and thnlen gotta haul 2 cars back to town that I'm buying.... Great

 

[landsoul]

Thanks! Yes it is a 3 piece. May get the winch at a later date. The guard is rated at 9500 lb. for a winch.

 

[domer94]

was the 2 door's turn for some love. chenged oil and filter , cleaned out PCV valve and hoses , hit the MAF with cleaner , hit the throttle body with cleaner. last but not least , replaced my side view mirirs with new units from ebay. i tell ya, one of the best cosmetic restorations for the money. it was about 45 for the pair of power mirrors, and the quality was outstanding. my originals worked fine with no cracks or anything , but were past the point of bug/tar remover or compound. they just started to bug me everytime i had a nice clean truck. i ordered some 2" wheel spacers for the rears. i wont have dough for a while for new wheels and 33's , so the next best thing to improve stance with the stockers is to push the reasr out a bit in the wells. i hope it will look ok

 

[I go every where]

Cut the muffler off and took it wheelin today! Now I have true dual cat back exhaust

 

[SunlitComet]

i think i would rather have the cat on the left. forget about dual.

 

[jerryjoe28]

started squeaking out of nowhere yesterday....replaced the ujoints on the rear drive shaft today and no more squeak!!

 

[rmodel65]

almost had it crushed by a tree. although it happened a few days ago

 

[I go every where]

Good choice sunlit, that's my gf lol. The one on the right is a buddys girl.

 

[domer94]

found a set of z71 wheels on craigslist for $300. mounted them with a set of 2" spacers on the rears to get them to fill out the well better. i think it made such a difference in stance . i also added some stainless steel wheel arch trim. so far im happy with the look




im thinking of some mud gueards all the way around , but havent made up my mind. the wheel centercaps are shot , so i will be replacing with a set i found on ebay.

one question , when removing the front right wheel , some ******* with an impact gun cross threaded the crap out of one lug. i had to grind it off , but the stud is no good anymore. can i get away with 5 lugs on these wheels and be safe?