What did you do to your OBS GMT400 Tahoe/Yukon Today?

[M123]

Actually you can rotate and do simple stuff in your media here on the forum if you upload the pictures there first.

 

[liquify33]

This is exactly how it shows in my phone. I had to rotate 90 then back and now it’s straight. Weird.

 

[Shadowz Edge]

Samsung phone?

Yup

 

[Tonyrodz]

Yup

Lol, me too, that's how I knew.

 

[liquify33]

New MAF, MAP and VSS and drives much better. Still chasing misfires on 3&4 over 70mph and torque converter releasing around 80.

 

[Squirrelsmith]

Pulled my passenger door off. Attempt #12 at getting it to shut right. Discovered my speakers were getting wet. Love this truck

 

[Shadowz Edge]

Pulled my passenger door off. Attempt #12 at getting it to shut right. Discovered my speakers were getting wet. Love this truck

I still have yet to pull my front doors to replace all the hinges since both doors are sagging. I'm not looking forward to that repair either. LOL

 

[Squirrelsmith]

Check it out what the heck is going on with my door

 

[Shadowz Edge]

Check it out what the heck is going on with my door

I've never had good dealings with Dorman so I'm going to say possibly a bad lock mechanism on their part. I would locate a new or even a used ACDelco original from a yard and see if that solves the issue.

There's also the possibility that even if the lock is good the door frame up at the top may be bowed in towards the body causing it to not be fully closed without extra force.

 

[Tonyrodz]

I've never had good dealings with Dorman so I'm going to say possibly a bad lock mechanism on their part. I would locate a new or even a used ACDelco original from a yard and see if that solves the issue.

There's also the possibility that even if the lock is good the door frame up at the top may be bowed in towards the body causing it to not be fully closed without extra force.

I agree with the Dorman conclusion. Try for a used oem if possible. I had the exact same problem with my 95 Blazer. Did the door hinges and got a used oem latch. Fixed it. Would close tight on the first try.