What did you do to your OBS GMT400 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Knowsknone

TYF Newbie
Joined
Jan 27, 2013
Posts
9
Reaction score
0
Location
Cherry Point
Today I decided to take my Tahoe out and play with her, forgetting about my lid flip, definitely drown her. Though, I did find out that my throttle body butterflies seal extremely well. Pulled the air cleaner, soaked up the water, turned her over a little bit and she fired right up. Thankfully I was able to coast out of the massive mud puddle Haha.
Only real problem, my wiper motor wont turn off. Lets hope its just wet and grounding itself.
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
Today I decided to take my Tahoe out and play with her, forgetting about my lid flip, definitely drown her. Though, I did find out that my throttle body butterflies seal extremely well. Pulled the air cleaner, soaked up the water, turned her over a little bit and she fired right up. Thankfully I was able to coast out of the massive mud puddle Haha.
Only real problem, my wiper motor wont turn off. Lets hope its just wet and grounding itself.

lucky!

---------- Post added at 08:32 PM ---------- Previous post was at 08:31 PM ----------

Finally installed LED interior lights...Wow what a difference. Simple easy upgrade.


yeah? how did you fair with the door switches and head light switch?
 

96redsport

Full Access Member
Joined
Feb 6, 2012
Posts
195
Reaction score
5
Location
Altoona, Pa.
Solved my problem of why my ABS and brake light was on.... Apparently you can't replace the indicator light with an LED light... Put the regular bulbs in and the lights went out... These are the only 2 that had any problems with the LEDs, not sure why...
 

moviewithnotitle

Full Access Member
Joined
May 13, 2010
Posts
356
Reaction score
53
Location
Jersey
lucky!
---------- Post added at 08:32 PM ---------- Previous post was at 08:31 PM ----------


yeah? how did you fair with the door switches and head light switch?

I probably should have been more specific. I did LEDs in the Dome light and kickpanel lights.
Still working on the door swap, but the bulb is bigger than the opening so some minor trimming will have to happen.
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
i think the rear door switches came out nice and bright. tho i think one failed already. the front switches and headlight switch leds were a disaster incandescent bulbs would do way better and now the mirror switch which is not externally changeable just burned out on me switch is less then 2 years old. i just did the doors and light switch in the last two weeks.
 

Phantom240

Full Access Member
Joined
Sep 28, 2012
Posts
144
Reaction score
1
Discovered that the end of my ball joint has been ground off, like the wheel broke off at some point. Strange. That'll be next on my agenda.
IMG_20130325_125631_725_zps10dac5be.jpg
 

Forum statistics

Threads
132,381
Posts
1,867,109
Members
97,021
Latest member
DogBoss
Top