Wheel spacers

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BugginOut

Member
Joined
Apr 23, 2020
Posts
55
Reaction score
60
Now that the lift is in place, it's standing a little skinny.
Thought about doing some spacers. Recommended brand and size for the tahoe? Brands to stay away from?

thx.
 

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,821
Reaction score
44,950
Location
Li'l Weezyana
With any spacer, I'd strongly advise you get hub-centric ones. It seems that BORA is one of the higher recommended brands. I have no personal experience with them or any other brands other than the ones I had. I ran these for about a year with no issues at all, and I drive aggressively: https://www.amazon.com/gp/product/B01GQECY16/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

They've gone up $10 since then. My brother has had them on his Sierra for about a year now. He drives like an ass, tows a trailer to the camp, etc. and hasn't had any issues, either.

For the aesthetics, I'd recommend you get 1/2" wider ones for the rear than you get for the front. Also, with the 1.5" ones, you may need to trim the excess, unthreaded tips off the lug studs. It will depend on how the mounting surface of your wheels are made. Wider spacers may minimize or eliminate this necessity.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,005
Reaction score
50,865
Location
Oregon
Supreme Suspension makes good quality hub-centric spacers as well, a bit less expensive than Bora iirc.
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,186
Reaction score
11,456
With any spacer, I'd strongly advise you get hub-centric ones. It seems that BORA is one of the higher recommended brands. I have no personal experience with them or any other brands other than the ones I had. I ran these for about a year with no issues at all, and I drive aggressively: https://www.amazon.com/gp/product/B01GQECY16/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

They've gone up $10 since then. My brother has had them on his Sierra for about a year now. He drives like an ass, tows a trailer to the camp, etc. and hasn't had any issues, either.

For the aesthetics, I'd recommend you get 1/2" wider ones for the rear than you get for the front. Also, with the 1.5" ones, you may need to trim the excess, unthreaded tips off the lug studs. It will depend on how the mounting surface of your wheels are made. Wider spacers may minimize or eliminate this necessity.
Would that have a negative effect on the awd or 4wd? I know wider or taller/shorter tires are harder on the drivetrain. Curious if spacers would do the same.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,005
Reaction score
50,865
Location
Oregon
Would that have a negative effect on the awd or 4wd? I know wider or taller/shorter tires are harder on the drivetrain. Curious if spacers would do the same.
What kind of negative effect are you thinking of? I ran 305/30/26’s on my AWD Denali for a couple years with no issues. I don’t see any problem with using spacers either.
 

Chert_Detective

Supporting Member
Joined
May 4, 2017
Posts
158
Reaction score
438
I always enjoyed Motorsport-Tech any time I needed spacers or adapters. A little pricey compared to other brands. But they are custom made to order to any dimensions, bolt pattern change, etc and made in the USA.
 

BourbonNcigars

Full Access Member
Joined
Dec 1, 2018
Posts
865
Reaction score
1,840
This forum never ceases to amaze me. Go to a Jeep forum and ask about wheel spacers and see if you get some helpful and polite replies like those above. You'll get many who adhere to the typical forum dogma of telling you spacers are an asinine idea and they'll explode less than a mile after you drive off and kill you and everyone in a 100 mile radius with shrapnel.

Here, you get helpful info.
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,186
Reaction score
11,456
What kind of negative effect are you thinking of? I ran 305/30/26’s on my AWD Denali for a couple years with no issues. I don’t see any problem with using spacers either.
The width between all the tires need to match. If your front stance width is different from your rear if could be ******* the drivetrain. Obviously 2wd don’t apply
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,186
Reaction score
11,456
This forum never ceases to amaze me. Go to a Jeep forum and ask about wheel spacers and see if you get some helpful and polite replies like those above. You'll get many who adhere to the typical forum dogma of telling you spacers are an asinine idea and they'll explode less than a mile after you drive off and kill you and everyone in a 100 mile radius with shrapnel.

Here, you get helpful info.
We talk and act like adults here . Weird concept to most people on the web:shrug:
 

Forum statistics

Threads
132,700
Posts
1,872,785
Members
97,512
Latest member
intobaitem
Top