Which Transmission Filter do I use? Shallow or Deep?

[stefenboy]

Hi everyone, I'm a new owner of my 60k miles 2005 gmc denali xl. I want to do my transmission service before my BBTune in January, but am very confused on which pan I have on my 4l65e (m32) transmission?? Do I order the Ac Delco TF289? or the TF339? or is it the Ac Delco 24208576? I am also doing the corvette servo. Did anyone use the complete drop in rebuilt unit from gmtransmission? I was told to rebuild and use my oem shaft with the corvetter servo. Thanks in advance.

Steven

 

[#1taho]

If you have a drain plug on the pan you most likely have the deep pan. Which will require the deep filter. I am not sure on part numbers but they will be able to tell you. Corvette servo I have done a few different ways. Depends on what your preference is.

 

[Sasquatch]

You can tell which pan you have by looking at it, If the pan is completely flat it`s the shallow one, If it steps down you have the deep pan.

 

[#1taho]

You can tell which pan you have by looking at it, If the pan is completely flat it`s the shallow one, If it steps down you have the deep pan.

Good find

 

[stefenboy]

Thank You that is very good information. I'm sure this will help others as well.

 

[01ssreda4]

Yep, just look to be sure.

 

[wesyder]

I have the same vehicle and i use the tf-351 from autozone, its for the shallow pan


Sent from my iPhone using Tapatalk