White LED Dome Lights

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
BP RETIRED

BP RETIRED

Full Access Member
Joined
Apr 27, 2012
Posts
158
Reaction score
1
so what about the install?

---------- Post added at 11:46 AM ---------- Previous post was at 11:36 AM ----------

nevermind... its a pretty simple install

---------- Post added at 11:56 AM ---------- Previous post was at 11:46 AM ----------

Are u having any issiues with the lights?

The only issue I had was the circumference of the end of the LED light seemed to be a tab bit smaller then the regular halogen lights. Reaching in an slightly bending the to two clamps fixed it. This also could have been from removing the old lights. When removing them I had to pull straight down and the two clamps could have bent out. ( When you replace yours you will see what im talking about). Also remember that if you plug the LED light in and it does not work you may have it in the wrong way. The first one I replaced did not work. Then realized that I had the light in the wrong way. I had the polarity wrong.
I used them tonight and have to admit they throw out some serious light.
 

felixgun

Full Access Member
Joined
Oct 7, 2010
Posts
9,742
Reaction score
125
Location
Lafayette, LA
so in other words... i probably just burned my $16... no biggie, i heard money grows on trees now a days

I bought some cheaper ones before and they burnt out REAL quick. I changed them out with some quality SMD/SMT-LED bulbs and they lasted much longer. When I changed from the Tahoe to the Escalade I just did the exterior LED change out though because I found that the white LED's were just too "white" versus the warm yellow of the stock incandescent bulbs.
 

NathanJax

Vacation Nathan
Staff member
Administrator
Supporting Member
Joined
May 9, 2009
Posts
49,130
Reaction score
943,577,147
Location
Jax, Fl
Nice write-up Nathan! I'm not finding a similar cross reference for the NNBS. Does anyone have the bulb sizes for our vanity, dome and puddle lights? Or are they the same??

The three spots in the roof are festoon bulbs so 6 total.

250


http://www.v-leds.com/6K-WHITE-3-CHIP-8-LED-p9770321-1-2.html

the puddle lights are 194

250


http://www.v-leds.com/194-168-158-LED/6K-White-LED/Flank-Style/tc511418-1-2/



the vanity lights are

250


http://www.v-leds.com/Shop/Control/fp/SFV/32481
 

gilbo

Member
Joined
Mar 29, 2012
Posts
43
Reaction score
0
i just recently replaced all of my interior, license plate, puddle, and reverse light with LED's

next up HID, fog lights
 

nuttkaze

Full Access Member
Joined
Jun 3, 2009
Posts
106
Reaction score
3
Location
Laplace, LA
Here is a site I have been using for quite some time. I recently bought 6 dome LED lights from them and switched over to them tonight.
Here is the site:
http://www.dealextreme.com/p/42mm-2w-6500k-126-lumen-9-smd-led-white-light-bulb-for-car-dc-12v-51376
Here is a Pic of the lights. They work nice and really illuminate the previous dark spots.
DSCN5092.jpg
Total for the 6 Lights was 16.20. The 4 LEDs you see at the top of the picture is a string set that I added since the SSV Tahoes dont have rear cargo lights.


Just place a order with two extra's!!! Even got 5% off with free shipping!!! Just remembered, that I have 2nd row TV with built in dome light..will these work??

---------- Post added at 09:29 PM ---------- Previous post was at 09:21 PM ----------

i just recently replaced all of my interior, license plate, puddle, and reverse light with LED's

next up HID, fog lights

I'm looking to change my license plate, puddle, and reverse lights with LED's..did you ever change them?? If so, can you point me in the right direction!!
 

blkonblk

Supporting Member
Joined
Dec 22, 2011
Posts
985
Reaction score
76
Location
NYC
[QUOTEWhen I changed from the Tahoe to the Escalade I just did the exterior LED change out though because I found that the white LED's were just too "white" versus the warm yellow of the stock incandescent bulbs.[/QUOTE]

That's why I didnt do mine yet, I think it will be to white/bright.
T
 

Forum statistics

Threads
132,043
Posts
1,861,482
Members
96,494
Latest member
rhammond3

Latest posts

Top