Will axles from early 80s k5 fit for sas swap

[skyhighsami]

I have a built 12 and Dana 44. I was thinking since so much of the front end needs to be replaced on mine what if I used these? Locking hubs, lockers and geared with 4.56 or 4.88. I will check tomorrow. I'm afraid 4.88 would be too aggressive with a 35" tire

 

[skyhighsami]

Nevermind they drop on the passenger side and I'd need a driver's side drop

 

[96ProCompTahoe]

seems the usual front axle is pulled out of older f250 or f350 used along with the FF 14 bolt GM rear

 

[rabbiporkchop]

I have a built 12 and Dana 44. I was thinking since so much of the front end needs to be replaced on mine what if I used these? Locking hubs, lockers and geared with 4.56 or 4.88. I will check tomorrow. I'm afraid 4.88 would be too aggressive with a 35" tire

buy a np241 from an 88-91 blazer or suburban, then you can use chevy axles