WINDSHIELD WIPER MOTOR 2012 SSV TAHOE

[Clay123]

2012 tahoe ssv. Bought a new windshield wiper motor thinking it was bad. Fuse was good and hear relays clicking when i turn the knob for the wipers. Plugged in the new motor and still nothing. It is a 5 pin, and has 12v on black and red wires when switched to on. Believe I had 12v on another set of wires, don't remember off the top of my head the colors. Any ideas or common issues?

 

[89Suburban]

Relays can still click and not work. Try swapping one over to test.

 

[mikez71]

Looking at the wiring diagram, the relays look to be integrated onto the pcboard in the underhood fusebox..

 

[89Suburban]

Looking at the wiring diagram, the relays look to be integrated onto the pcboard in the underhood fusebox..

View attachment 448856

My man with the wire diagrams.

 

[mikez71]

Everytime I look at it, it's more complicated than I want it to be!

I see a black wire for the ground... but no red wire?


Hopefully OP won't need a new fusebox, that seems to have been happening for various reasons..
Might try jumpering the grounds to a separate ground, or check those two grounds.. (G201 is under the dash defroster panel)