So last night I was using my wipers on intermittent and suddenly they just started going and wouldn't turn off til I shut my truck off. Cruise still works , fluid still works , and signal is still working afaik. From what I have been able to find it looks like the motor control board .Any more suggestions before I order it? The board is pretty cheap and I can prolly do this myself I would think.
Wipers won't turn off
- Thread starter ricky68
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
cmc76
Full Access Member
- Joined
- Sep 5, 2014
- Posts
- 685
- Reaction score
- 313
Might be the multi function switch itself
That's what came to mind for me as well. Not sure how to tell for sure though.
cmc76
Full Access Member
- Joined
- Sep 5, 2014
- Posts
- 685
- Reaction score
- 313
If he unhooked the switch and they go off. Figured out.
Fyi. The torx head screws are a hassle to get to
Fyi. The torx head screws are a hassle to get to
east302
Full Access Member
It's very likely that it is cracked solder joints on the wiper board. Either remove the board and reheat the joints or replace the board.
