won't start

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

nick8403

TYF Newbie
Joined
Jan 30, 2013
Posts
11
Reaction score
0
I have a 97 Tahoe 5.7 vortec it was running fine then it just died changed fuel filter and still nothing can still hear pump and getting good pressure to lines behind the throttle body but its not getting any gas in the throttle body can dump gas down it and it runs. What am I missing any help
 
OP
OP
N

nick8403

TYF Newbie
Joined
Jan 30, 2013
Posts
11
Reaction score
0
What is a fuel spider? And its as good now as it was before it died I'm new to dealing with throttle bodies and all the electronic stuff
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
187
Location
unknown at this time.
your fuel lines enter a body which, if old style goes into a body with injector valves in it there are output lines with a poppet valve on then end of each one that goes to to an injector runner of it own on the lower manifold. being as there are eight skinny lines stretching out is is nicknamed the fuel spider. the new design moved the injectors out of the body to enhance reliability among other things. the vortec throttle bodies move no fuel at all just air. what pressure do you get when following the tests below?

gm-vortec-spider.jpg


http://www.sunlitcomet.com/pdf/auto...96-chevy-tahoe-fuel-pump-pressure-testing.pdf
 
OP
OP
N

nick8403

TYF Newbie
Joined
Jan 30, 2013
Posts
11
Reaction score
0
I haven't messed with it today but I know I'm getting fuel to the spider but that's where it stops
 
OP
OP
N

nick8403

TYF Newbie
Joined
Jan 30, 2013
Posts
11
Reaction score
0
Well I know it cause I pulled the lines going into it and far as how much I'm assuming its enough considering my pump checked good and its building up enough preassure that when I went to remove line it shot up and hit the hood
 

_Dylan_

STAY FROSTY
Joined
Jan 10, 2012
Posts
1,547
Reaction score
6
Location
941
Did you check for spark? Is it throwing a code?

Is it cranking over like normal, but no start?
 

retorq

Full Access Member
Joined
Mar 4, 2010
Posts
3,018
Reaction score
10
Location
Kingman AZ
Well I know it cause I pulled the lines going into it and far as how much I'm assuming its enough considering my pump checked good and its building up enough preassure that when I went to remove line it shot up and hit the hood

:chewie:
 

Forum statistics

Threads
132,208
Posts
1,864,051
Members
96,737
Latest member
WybotYukon
Top