Your Vehicles as they sit now....

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

thumper_ehhhhh

Full Access Member
Joined
May 5, 2009
Posts
512
Reaction score
4
Location
Canada ehhhhh
before stolen
IMGP4395.jpg

recovered and written off this is how she sits in the wreckers drivers window wide open so sad
PA220125.jpg

PA220140.jpg

PA220133.jpg

PA220135.jpg

PA220132.jpg

PA220128.jpg

PA220119.jpg

PA220122.jpg

PA220118.jpg
 
Last edited:

Alex33

Full Access Member
Joined
May 6, 2009
Posts
1,235
Reaction score
25
It is lower than an average drop for sure. I have done a lot to get it there.

What do you have installed suspension wise?


Trevor, that sucks bro. They didn't take much it looks like, just enough to ruin a good truck.
 

LI99HOE

Top Notch Tech.
Joined
Jul 29, 2011
Posts
440
Reaction score
4
Location
N.Y.
Mine chillin' in my driveway....
I got an RBP black locking gas door on it now.
 

Attachments

  • DSCI0012.jpg
    DSCI0012.jpg
    97.6 KB · Views: 49
Last edited:

MeanGreen03

Full Access Member
Joined
May 31, 2009
Posts
358
Reaction score
4
Location
TX
What do you have installed suspension wise?

DJM arms and spindles up front, DJM TB coils out back with cut coils. I also body dropped it so that's another ~3/4". For some reason I can't get the passenger front to come down any more. It is around 3/4" higher than the driver side and I have the torsion bar bolt all of the way out. I should probably get a drop key for that side but it may lower it too much. The drivers side torsion bar bolt is pretty much all of the way in. It sits ~32.25" from ground to fender lip with a 305/35/24 tire the last time I measured when I finished it all up.
 

Donnie Yukonie

Yates Caretaker
Supporting Member
Joined
Jul 31, 2011
Posts
5,125
Reaction score
161
new grille 2011-09-19_16-08-56_131.jpg
b4 the grille but everything else is the same
2011-09-17_13-56-45_285.jpg
2011-09-17_13-57-10_797.jpg
2011-09-17_13-57-30_63.jpg
2011-09-17_13-58-12_665.jpg
 

Alex33

Full Access Member
Joined
May 6, 2009
Posts
1,235
Reaction score
25
DJM arms and spindles up front, DJM TB coils out back with cut coils. I also body dropped it so that's another ~3/4". For some reason I can't get the passenger front to come down any more. It is around 3/4" higher than the driver side and I have the torsion bar bolt all of the way out. I should probably get a drop key for that side but it may lower it too much. The drivers side torsion bar bolt is pretty much all of the way in. It sits ~32.25" from ground to fender lip with a 305/35/24 tire the last time I measured when I finished it all up.

Def a lot of parts, but the truck looks great!!
 

Alex33

Full Access Member
Joined
May 6, 2009
Posts
1,235
Reaction score
25
Thanks!! I appreciate it... Yours looks great as well! How are you liking the new drop?

It rides very well. I put about 250mi on it this weekend and I'm very pleased. Half of the drive I was pulling a trailer loaded with a CBR954RR and it didn't bang around at all. I think it rides better at 30.5/32 than it did before at 32.5/34 :Handshake:
 

Forum statistics

Threads
132,717
Posts
1,873,140
Members
97,543
Latest member
Gates_21_Tahoe

Latest posts

Top