2004 Suburban Z71 brake issue

OR VietVet · Jun 1, 2024

I agree with the premise of a failed master cylinder. Unbolt from the front of booster. Leave the lines attached. Pull away from the booster and see if there is fluid in the pocket at front of booster and is wet at the back of the master cylinder. If doing a 2 person bleed, put a small section of 2"x4" wood at the floor so the pedal cannot go all the way down to the floor.

By the way, you never said why you replaced brake components to begin with. Was it for the pedal feel problem?

rockola1971 · Jun 2, 2024

Dont forget to check for collapsing rubber hoses!!!!

03GMCYukonXL · Jun 5, 2024

rockola1971 said:
Master is probably ruined AND there is probably alot of air trapped behind the solenoids in the ABS manifold which you cant get out without either locking up the brakes a millions times and rebleeding after or just use a bi directional scanner with the auto bleed function like the tech 2. It uses the ABS pump to pump up your brakes and is a one man job.

Can an HP tuner do this? I own one

Scottydoggs · Jun 5, 2024

03GMCYukonXL said:
Can an HP tuner do this? I own one

hpt cant. you need a tech 2 scanner or its equal to do the abs bleed part.

ive changed calipers on my 05 tahoe with out doing the abs bleed. key is keeping the master full and not letting it drain.

rockola1971 · Jun 6, 2024

03GMCYukonXL said:
Can an HP tuner do this? I own one

Nope you need a tech2, alltel, snap on or hgiher like them.

2004 Suburban Z71 brake issue

OR VietVet

Multnomah Falls

rockola1971

Full Access Member

03GMCYukonXL

Full Access Member

Scottydoggs

Full Access Member

rockola1971

Full Access Member

Similar threads

Forum statistics

Latest posts