Oil pump change after AFM/DOD delete?

BLS9 · Sunday at 3:01 AM

Oil pump change after AFM/DOD delete?

Hi folks , iam curious about my melling oil pump standard volume M295 ( standard pressure and volume) i ordered it and shipped already by next week i will work on DOD delete with TSP stock replacement kit with stock camshaft included

It does really matter ?! Should i replace it with high pressure or its fine !? Any advice would be greatly appreciated

SpareParts · Sunday at 7:54 AM

From what I understand, With no DoD/AFM or VVT, the stock pressure/volume oil pump is correct.

BLS9 · Sunday at 9:00 AM

SpareParts said:
From what I understand, With no DoD/AFM or VVT, the stock pressure/volume oil pump is correct.

i will just retain the VVT

j91z28d1 · Sunday at 12:49 PM

BLS9 said:
i will just retain the VVT

I've read the vvt takes more oil volume to operate than the afm. afm basically a dead head system. not much oil flows past anything except thru lifter internal tolerances when active and nothing extra when not in afm mode. also something about an aluminum block gaining more bearing clearance than a iron block when heated up? so while high pressure isn't needed, most I've read and hear seem to recommend a high volume pump since you're in there at the time and it can't hurt.

SpareParts · Sunday at 2:26 PM

With VVT, I would also go high volume.

Foggy · Monday at 4:01 PM

You will need the higher volume pump if you are keeping VVT.. No question !

Oil pump change after AFM/DOD delete?

BLS9

TYF Newbie

SpareParts

Full Access Member

BLS9

TYF Newbie

j91z28d1

Full Access Member

SpareParts

Full Access Member

Foggy

Full Access Member

Similar threads

Forum statistics

Latest posts