Search results

  1. DallasTahoe

    Gauge cluster adjustment??

    I think fuel gauge, coolant, and oil pressure maybe, speedo and rpm are good, just trying to verify what they are supposed to be, I know how to reposition the needle I just want know if there's a zero point to be able to put the needle back on at the right position, like reset or something...
  2. DallasTahoe

    Gauge cluster adjustment??

    Some of my gauges may be off, the guy who had it before me I believe took it apart and possibly didn't put the needles back in the right spots, is there anyway to adjust them to read properly or to get them to a zero point or starting point? Sent from my iPhone using Tapatalk
  3. DallasTahoe

    Oil pressure readings

    Just curious as to what my gauge should be reading, I need a baseline so I can get a jump on it if need be, after my engine is warmed up mine reads about 20 at idle while in gear, and about 40 on the highway doing 60 or so @17-1800rpm. I think it's low but I need some help to be sure. Thanks...
  4. DallasTahoe

    Help identify these parts

    The first pic you showed has a vacuum line that goes across the top of the intake and attaches to another little canister looking thing that is at the bottom of the AC dryer Sent from my iPhone using Tapatalk
  5. DallasTahoe

    Help identify these parts

    Here how they should look hooked up Sent from my iPhone using Tapatalk
  6. DallasTahoe

    2000 OBS Z71

    I know for my 98 Yukon it has the police package which are the 11in drums, from what I understand that is for the 4wd trucks, the other is a 10in drum, it's only an inch difference but a huge difference in the size of the shoes Sent from my iPhone using Tapatalk
  7. DallasTahoe

    4wd problems questions

    Had a similar issue, switch would only light up with slight pressure, took it apart and resoldered the three prong power input and now it works fine, try that, mine had broken solder joints Sent from my iPhone using Tapatalk
  8. DallasTahoe

    Antifreeze leak. Please help

    Try tightening the bolts just a lil bit, mine was leaking from the same place, just tightened it a lil bit and it stopped, but it only a temporary fix, replace the gasket asap! if that is where it's coming from. However the amount of coolant leaking out and the squeaking says water pump, I would...
  9. DallasTahoe

    What did you do to your OBS GMT400 Tahoe/Yukon Today?

    Changed the oil and had an alignment done, now she's ready for the road on Monday! Sent from my iPhone using Tapatalk
  10. DallasTahoe

    Ugh emissions emmissions

    I put in a Bosch, good brand for only $41.99 and it passed inspection, I couldn't be happier Sent from my iPhone using Tapatalk
  11. DallasTahoe

    Stupid Emissions

    I already got it to pass this morning Sent from my iPhone using Tapatalk
  12. DallasTahoe

    Ugh emissions emmissions

    So I tried again at the inspection this time it turned on the SES light so went to autozone, they pulled the code p1153 HO2S-21 (bank 2 sensor 1) insufficient Switching, and since I can't pass because of an o2 sensor showing not ready I'm going to replace it and hope this is the issue, any...
  13. DallasTahoe

    1997 Yukon slt 4wd

    So is bank 2 right side is when your looking at the motor or sitting in the vehicle? Sent from my iPhone using Tapatalk
  14. DallasTahoe

    Ugh emissions emmissions

    So now I'm having issues getting mine inspected, already been to the inspection place 5 times the first four times because it said O2 sens not ready and egr says not ready, they said maybe because it hasn't been driven much since disconnecting the battery. So I drove it around on the freeway...
  15. DallasTahoe

    Stupid Emissions

    So now I'm having issues getting mine inspected, already been to the inspection place 5 times the first four times because it said O2 sens not ready and egr says not ready, they said maybe because it hasn't been driven much since disconnecting the battery. So I drove it around on the freeway...
  16. DallasTahoe

    Pitman/idler arm replacement

    I'm just about ready to put the ol 98 Yuk on the road, but I noticed last week when driving it down the street that I had the death wobble, so today I checked the front end play and I need to replace the pitman and the idler arm. Got them both and rented the puller for them but there is no room...
  17. DallasTahoe

    anyone running 15s -pic request

  18. DallasTahoe

    LED interior lights

    Here's the final install, came out pretty clean I think and it works great, nice and bright. I'll make a plate and mount the other one under the hood maybe for some brighter light there. Whatcha think? Sent from my iPhone using Tapatalk
  19. DallasTahoe

    Interior storage

    Thanks but I took the storage case off of the door, just didn't feel right or look right for some reason Sent from my iPhone using Tapatalk
  20. DallasTahoe

    LED interior lights

    My landlord/buddy gave me these lights last year after he remodeled his kitchen, these are under cabinet lights they measure 2 3/4 in across and are 5/8 in thick, they have 3 led lights and they are 12 volt, as I've discovered most led under cabinet lights are. So I tested them out and they are...
  21. DallasTahoe

    Engine temp gauge

    Never mind it went away, idk why or how.... Gremlins Sent from my iPhone using Tapatalk
  22. DallasTahoe

    Engine temp gauge

    I even plugged in the old one to see if it would change but it didnt Sent from my iPhone using Tapatalk
  23. DallasTahoe

    Engine temp gauge

    I know this is an old post but I was having the same problem, I changed it out and now my check engine light is on, I tried three times to disconnect the battery to clear the codes, each time for about 30 minutes and the sel is still on, is it one of those codes that needs to go through 100 run...
  24. DallasTahoe

    Please help...I am frustrated and lost on this one.

    Put some axle grease on the splines of the driveshaft that goes into the tranny, worked for me Sent from my iPhone using Tapatalk
  25. DallasTahoe

    Interior storage

    Yea I filled it with stuffing from an old pillow, it's sounds really good inside, it's not real loud outside, but I don't care about what anyone else outside of my truck can hear. I actually thought about taking one of the subs out to give it more airspace, or just redoing the box completely...

Forum statistics

Threads
132,326
Posts
1,866,058
Members
96,927
Latest member
1997tuhhoe

Latest posts

Top