Search results

  1. donjetman

    Crankshaft Pulley, Seal, Bolt - Replace

    Yeah, when @skpyle did the stock torque to yield bolt it took almost 300 ft/lbs. Crazy o_O
  2. donjetman

    Crankshaft Pulley, Seal, Bolt - Replace

    I'm using the ARP ($40) on my Corvette. I'll use the much cheaper ($13) stock bolt on my Yukon and LS swapped 51 Chevy PU.
  3. donjetman

    Front End Refresh

    07 Yukon Denali 12/21/23 MILEAGE– 192,400 Started tear down to replace: All 4 control arms w/ball joints, bushings, hardware CV axles Bearinghubs and bolts (3) Innerand outer steering tie rods w/boots Caster& camber adjusting kits Rack& pinion bushings and mount Rotors...
  4. donjetman

    Crankshaft Pulley, Seal, Bolt - Replace

    07 6.2L w/193k miles Bought the tools so I can change the pulleys on the 3 LS powered vehicles we own. I've decided to not use the ARP bolt on The Denali, and I'm waiting for a stock bolt, GM # 12557840, to arrive.
  5. donjetman

    Oil catch can install

    clean air goes in the passenger side dirty air comes out the driver side
  6. donjetman

    Transmission Codes P0842, P0872, P0877**UPDATE**

    Pics 3 of the 4 laminents were torn/bad. I change the the atf in the pan (6 qts) every 25k miles and the filter and fluid every 50k miles
  7. donjetman

    Transmission Codes P0842, P0872, P0877**UPDATE**

    2007 Yukon Denali with 6L80 with 193k miles. Got around to replacing the 4 Sonnax pressure switch laminates on the 6L80 TECHM in our Denali 6L80 tranny . Removed: front sway bar frt drive shaft trans cross member exhaust Y-pipe trans pan & fluid (took a sample for analysis) filter 6 bolts...
  8. donjetman

    2013 Escalade ESV Next BIG adventure: Cooling system refresh, Big 3 Electrical upgrade, Reseal intake, and VLOM mod...

    I installed the GruvenParts https://www.gruvenparts.com/shop-by-car/gm-truck aluminum billet Ts for the front heater 4 yrs ago after a plastic T broke. No regrets ot issues since.
  9. donjetman

    Sealing up the oil cooler block-off plate once and for all?

    Mid September I removed my bypass filter setup and reinstalled the stock oil cooler block-off plate & bolts with Felpro # 72435 gasket with a thin coat of RectorSeal T+2 on the gasket. No leak.
  10. donjetman

    Want to take my 2010 Yukon XL Denali with 180,000 miles for a family trip from Michigan To Florida - Can you help me make this a success!

    there is rpo code BS1 in my 07 Denali glovebox = Insulation, Acoustical and I have 2 different brand/style catch cans on 2 different vehicles and get 1 to 2 oz of dark oily fluid from each per 5000 miles.
  11. donjetman

    2012 Hoe won’t shut off

    @Roosters_Hoe There is a battery charge wire and brake control wire lose near the fuse box from/for the trailer 7 way plug. Here's what I did with them (pic): https://www.tahoeyukonforum.com/threads/anybody-know-what-these-are.129123/#post-1608619
  12. donjetman

    2013 Escalade ESV Next BIG adventure: Cooling system refresh, Big 3 Electrical upgrade, Reseal intake, and VLOM mod...

    I have 3 vehicles with LS engines. All of which are driven conservatively, so none are pinned. I do plan on changing the balancer on 2 of them (07 Denali & 02 Corvette) this winter. I probably won't pin them, but never say never.
  13. donjetman

    2013 Escalade ESV Next BIG adventure: Cooling system refresh, Big 3 Electrical upgrade, Reseal intake, and VLOM mod...

    @skpyle Pinning the balancer to the crank is a easy common mod for all LS engines. Youtube and summit racing are your friends.
  14. donjetman

    2013 Tahoe - Spark plug needed replacement after 8k miles

    A lot of chicom counterfeit parts in the marketplace these days :(
  15. donjetman

    Tired Battery=Wonky Fuel Gauge

    A couple of weeks ago the fuel gauge started acting wonky. After being parked for a while, at next start-up, the gauge would be on empty or full ? Eventually I got a check engine light and code P0462 = Fuel Level Sensor A Circuit Low Input. The battery was 5+ yrs old. I tested its capacity, it...
  16. donjetman

    Fuel pump only replacement 07 suburban

    Maybe? Delphi # FE0114 on amazon $58
  17. donjetman

    Want to take my 2010 Yukon XL Denali with 180,000 miles for a family trip from Michigan To Florida - Can you help me make this a success!

    Here's the post I did 5 yrs ago with pics when I installed 3 of these bridge clamps for 3 broken exhaust manifold bolts. Still going strong today with 192k miles. https://www.tahoeyukonforum.com/threads/exhaust-manifold-bolts-no-bueno.108605/
  18. donjetman

    2013 Escalade ESV Next BIG adventure: Cooling system refresh, Big 3 Electrical upgrade, Reseal intake, and VLOM mod...

    @B-train Its been discussed here. Somebody will probably step in and clarify.
  19. donjetman

    2013 Escalade ESV Next BIG adventure: Cooling system refresh, Big 3 Electrical upgrade, Reseal intake, and VLOM mod...

    Yes Bad things would happen. Non AFM cam swap is required to run the non-AFM smooth VLOM, and AFM needs to be tuned out/turned off.
  20. donjetman

    08 Yukon Denali Rear main - what else?

    Here's all the stuff I did, when I did the rear main seal, shortly after buying the 07 Denali: MILEAGE – 132,000 11/23/18 to 12/7/19 Installed catch can - $40 Installed rear main seal & cover – Dorman 635-518 - $43...
  21. donjetman

    Catch can flow discussion

    5 years and no problem
  22. donjetman

    Catch can flow discussion

    I mounted my $25 catch can at the hood gas spring lower mount, between the power brake booster and the driverside valve cover. No regrets.

Forum statistics

Threads
132,677
Posts
1,872,431
Members
97,482
Latest member
kielyr

Latest posts

Top