Search results

  1. strussy

    water inside, and NO its not the normal things that have been mentioned!!

    yeah mine leaks somewhere at the sunroof can't find it. weep hole are all clear and it still leaks. water drips out of the rear climate controls esp. when i turn a corner.
  2. strussy

    Drivers Heated Seat Problem

    from what i can see they all look plugged in, but maybe i'll have to take the seat out and check. cant see the switch being bad if it lights up on high and low . if anyone knows where the module is for it that would be helpful.
  3. strussy

    Drivers Heated Seat Problem

    Have a 01 Denali drivers seat worked fine one day and the next it stopped. Pass works fine. The switch lights up on high and low just no heat . checked all fuses and they are fine. hope its not the element,but i figured it would be the top or bottom not both heat pads. Any HELP would be great.
  4. strussy

    sealed vs. ported

    no i'm running a 250 amp circut breaker
  5. strussy

    sealed vs. ported

    Have the big three and a 200 amp alternator found out the breaker was bad ---------- Post added at 10:06 AM ---------- Previous post was at 10:04 AM ---------- Don't matter got my new mmats 1400.1 last night we should be good now
  6. strussy

    mmats dhc 1400.1 ?

    Time for a new amp what's do you guys think of this amp I hear its a beast.
  7. strussy

    sealed vs. ported

    Think I might have a bad circut breaker I'm not running a fuse don't real like them cause if ya blow one and ya ain't got one your screwed
  8. strussy

    sealed vs. ported

    Sorry bro no disrespect but been doing this for a long time
  9. strussy

    sealed vs. ported

    Volts are fine 14.1 and It's wired correctly
  10. strussy

    sealed vs. ported

    I have a ported box with 2 12in rockford p3s and a 1000 watt soundstream amp. Never had ported before the nali had a sealed box in my trans am . Now with the ported box the amp shuts off with gains turned half way with the sealed in the t/a had gains up all the way no problems. Any help would be...
  11. strussy

    New alt and batt. Still have voltage drop

    Cleaned t/b and seem to be fine so far so good .but does anyone know what the proper idle is in park and drive .mine is 800 in park and 600 in drive
  12. strussy

    New alt and batt. Still have voltage drop

    No its all back to stock. Gonna try cleaning the t/b cause it was fine before the alt. Now all of a sudden I have a low idle. Now the same prob with new alt. Don't know where to go after that ---------- Post added at 04:29 PM ---------- Previous post was at 04:28 PM ---------- @ blue flame it...
  13. strussy

    New alt and batt. Still have voltage drop

    Idles at 500 both park and drive I think that's to low if not the t/b what else?
  14. strussy

    New alt and batt. Still have voltage drop

    Idle is fine I think I might have a bad ground somewhere. This sucks cause I want to play my system but don't want to drain everything. Truck runs and drives fine no problems there.
  15. strussy

    New alt and batt. Still have voltage drop

    i will this weekend but i dont konw if it will help. i put a 4gauge power wire ont he alt to the batt. and it was still the same. then i just took it off and no difference.
  16. strussy

    New alt and batt. Still have voltage drop

    New 200amp alt and batt. and volts drop from 14 to 12 when braking or stop at a light .also when a/c is on and raido and when using the windows up and down. PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!
  17. strussy

    BIG 3 help

    Thanks guys for all the info very helpful. Think I'm gonna go with 4gauge for now till I get my new 250 amp alternator.
  18. strussy

    Used 1000 grit sandpaper to remove oxidation. Now I need to remove the scratches.

    use 1500 then 2000 after that get 3000 on a d/a wet then you can buuf it to a sheet of glass use 3m finessit or meg diamond cut [trust me bro been in the biss 21years]
  19. strussy

    BIG 3 help

    @ sparg93 i'm adding wire prob. 0 or 2gauge just wondering what size fuse i should use maybe 100 0r 150amp
  20. strussy

    BIG 3 help

    thanks carcrz been in the auto industry for 20 years and never done a big 3 i stick with autobody also what size fuse should i use?
  21. strussy

    BIG 3 help

    ok guys do i NEED to run a fuse between the wire from my batt. to alt. or can i run a straight wire?
  22. strussy

    bose radio and rosen dvd player

    i'm a newbie. anyone out there know what to do for the bose raido to hook up my system? and i have a factory rosen dvd player under the seat and a monitor in the head liner,but dvd player reads disc error tried evey cleaner and even took it out and cleaned the lense with alchol and still...

Forum statistics

Threads
131,397
Posts
1,850,326
Members
95,490
Latest member
rnfernandez1968

Latest posts

Top