Search results

  1. mudslinger96

    Another 4WD Question

    Do you think I need to disassemble the whole thing to see it or just remove the part where the actuator is at
  2. mudslinger96

    Another 4WD Question

    Hey Guys I'm Kind Of In A Bad Situation Right Now. It's Been Awhile That My4WD Hasn't Been Working Because Of A Bad Actuator Well I Finally Replaced It And Went To Try It Out And No 4WD. So I Checked Everything My TC Is Going Into 4WD And My Front Actuator.Is Engaging But My Front Tires Won't...
  3. mudslinger96

    Starter bendix not engaging

    Had the same problem in my Yukon with the bendix being bad. You could simply take it to get fixed I fixed mine myself just got the parts at a local shop that fixes starters and altetnators. Got the parts for about $10.
  4. mudslinger96

    Body Lift Questions

    A buddy of mine is running 35"s with just a 3" body and minnor trimming
  5. mudslinger96

    Got all the parts, ready to go

    Nice looking truck. By the way on the sway bar links you need to add them on when you order the kit that's what I did when I ordered my rcx 6". I'm not sure if you need them for a 3" though you might have to look around for other people that run that same kit.
  6. mudslinger96

    6 inches+ lets see your rig

    It is possible i was running my 37s with only the rcx 6" with no rub at all
  7. mudslinger96

    How to: NBS master cylinder swap for firm brake pedal

    First time I hear of this. I might do this mod since I don't want to change my ps pump to do hydroboost
  8. mudslinger96

    What am I doing wrong!!!

    Same thing was happening to me when I swapped out my torsion bars. The bars themselves are left and right so if you put them backwards they will not adjust properly. Look at the ends they should have either an R or an L with an arrow. Make sure the side with this written on there goes back were...
  9. mudslinger96

    What am I doing wrong!!!

    Did you remove your torsion bars from the truck then put them back in?
  10. mudslinger96

    Body Lift Pending Need Help

    Mcallen, Tx. I think we are to far apart :bawl:
  11. mudslinger96

    Body Lift Pending Need Help

    My two rear bolts are exactly like those you posted maybe a bit worse I will soak them with pb then try the welding think to see if it works. Thanks for the input guys
  12. mudslinger96

    Body Lift Pending Need Help

    Working on a body lift for my 96 Yukon 4Dr but the rear bolts snapped off now need help removing them any input on how to get them out or is there another way of doing this
  13. mudslinger96

    New two door on forum

    X2 on the cab lights
  14. mudslinger96

    Underbody and Frame Paint

    It's been on there for about 6 months or so holds pretty Good just on my wheel wells i have minor paint chiping off as for the rubberized undercoating i used about one can per wheel well before using the RUSTOLIUM but all of it came off maybe i did not clean it well or maybe got the pressure...
  15. mudslinger96

    Underbody and Frame Paint

    I removed My tires and washed the chassis and wheel wells with dish soap then gave it about two coats with RUSTOLIUM oil based paint works pretty Good
  16. mudslinger96

    I have a 2000 limited Tahoe, lift questions

    This was mine with a 2" block and tb crank on 325/60R18(33.4") stock ride with no rub. For reference:
  17. mudslinger96

    What did you do to your OBS GMT400 Tahoe/Yukon Today?

    Changed the oi and filter, oil pan gasket, and heater core valve
  18. mudslinger96

    Opinions/criticizing wanted!!

    I say chrome center cap :anitoof:
  19. mudslinger96

    Call it crazy, but... (Rear Gears)

    Are you running stock tires or are you lifted?
  20. mudslinger96

    How many actually wheel there hoe's?

    Wheel it, take it camping and trail riding once in awhile
  21. mudslinger96

    6 inches+ lets see your rig

    RCX 6" 37s on 18"s
  22. mudslinger96

    Newbie here, need suspension help

    Nice looking truck. As for the ride why didn't you keep your stock keys and crank them a bit my 96 was just cranked a bit with a 2" block out back riding on 325/60R18(33.4") it had a pretty stock ride.
  23. mudslinger96

    steering stabilizer??

    Mine feels normal when turning my 37s so i guess it does work. Just make sure to get one to use on a stock suspension for you guys with just crank or body lift. ordered one for a buddy of mine turns out it didn't fit because it was only ment to be used with the 2-3" suspension lift from Rancho.
  24. mudslinger96

    What did you do to your OBS GMT400 Tahoe/Yukon Today?

    Changed the thermostat and the heater hose connector on the Yukon
  25. mudslinger96

    fender flares

    I saw some on lmc for about $800 but they are really nice k believe the are 3" pocket style

Forum statistics

Threads
131,394
Posts
1,850,315
Members
95,487
Latest member
ela2q

Latest posts

Top