Hi guys, new here.
My 00 Escalade with the 4L60E trans was jumping from 1st to 3rd and slipping in and out of OD, no check engine light, no burnt smell from trans oil and no metal shavings in pan. I replaced all solenoids, harness, TPS and trans speed sensor with no luck. Finally I replaced the trans 2-4 servo with a corvette's and bingo, it ran like a champ. I wanted to share this cuz during my research i couldn't find anything on the possibility of the servo being the issue.
I hope this will help someone out there.
My 00 Escalade with the 4L60E trans was jumping from 1st to 3rd and slipping in and out of OD, no check engine light, no burnt smell from trans oil and no metal shavings in pan. I replaced all solenoids, harness, TPS and trans speed sensor with no luck. Finally I replaced the trans 2-4 servo with a corvette's and bingo, it ran like a champ. I wanted to share this cuz during my research i couldn't find anything on the possibility of the servo being the issue.
I hope this will help someone out there.
