Did stuff today
-Installed redhead box, one finger steering at idle now.
-OEM rear UCAs which weren’t really bad like I thought. I think maybe just the driver side bolt that goes to the axle was loose.
-New TBSS dudes rear endlinks but didn’t drill and move the sway bar over because my stuff fits fine.
-Swapped from $20 catch cans to my $300 Mighty Mouse and found out my nitrogen cylinder on my Tahoe hydroboost which I think is OEM. Is actually twice the size as my RCSBs which is from a duramax. It had clearance issues so I had to ghetto fab a bracket.
-Found ac sensor wiring issue, no idea why the wires are legit stripped.
-Did oil change to Rotella T6 and a Wix filter cause it’s hot down here and this thing suffers from kinda low idle OP. I also found nearly nothing on the magnet and he filter looked clean after 5k.
-Lastly, removed steering stabilizer. The shock seems fine but the rubber bushings are completely gone. I’d like to replace them with poly and maybe a Bilstein shock cause they are pretty. But if anyone has a link or part # to poly bushings I’ll just do that. Although I’m gonna drive it a bit and see if I think the stabilizer is even worth it.
