2016 Yukon Keyless Start System.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

laracohran

TYF Newbie
Joined
Mar 18, 2025
Posts
2
Reaction score
0
Hey everyone! I have a 2016 Yukon and my passive lock/unlock buttons on the door handles are not working. I saw a thread with a similar problem but wanted to ask if anyone could tell me where the antenna for the keyless ebtry system is located? I wanted to replace it, but not sure where it's located. Thank you!
 

Geotrash

Dave
Supporting Member
Joined
Feb 16, 2018
Posts
6,753
Reaction score
16,984
Location
Richmond, VA
Hey everyone! I have a 2016 Yukon and my passive lock/unlock buttons on the door handles are not working. I saw a thread with a similar problem but wanted to ask if anyone could tell me where the antenna for the keyless ebtry system is located? I wanted to replace it, but not sure where it's located. Thank you!
Assuming you have passive entry (ATH), there are multiple antennas for different parts of the vehicle.

The keyless entry door antennas are located in the left front and right front exterior door handle bracket. The antennas are serviced as part of the door handle assembly. The antennas are controlled by the keyless entry control module. When the exterior door handle button is pressed, the respective antenna will send out a challenge to the keyless entry transmitter, which begins the passive entry communications.
 
OP
OP
L

laracohran

TYF Newbie
Joined
Mar 18, 2025
Posts
2
Reaction score
0
Thank you for your response. So does this mean I will need to purchase the door handle assembly?
 

Forum statistics

Threads
134,040
Posts
1,895,502
Members
99,495
Latest member
ddrakenfd22
Top