2018 Yukon XL Air Cleaner Housing Cover Bolt

[Doubeleive]

Buddy, the only chill that is in order is your triggered reaction to this topic. Relax, it's an internet forum for exchanging information.

I guess I just have a different perspective I used to have to go to the hardware store pretty much daily to keep a business in business...
trying to get a single overpriced and often unavailable separately part from the dealer is often a useless endeavor.
"most" bolts are either metric or standard and either fine or coarse thread, once you have that memorized it's a breeze to find what you need.
then it just boils down to grade of bolt

 

[markni12301]

My go-to air cover replacement bolts are pole barn screws. Look 'em up - comes complete with washer and gasket. A strong solid replacement fastener. And I'm right there with you! I fret every time i loosen these things!

 

[tom3]

I did the same thing, and those bolts are an odd ball deal too. I finally took the inner fender off and the little bolt was in the front right near the fog light in a little pocket. If you do this pay close attention to where the screws go in the inner fender. I'll never, ever, drop that bolt again.

 

[tom3]

And it's not the bolt, it's the principle of the thing.

 

[FunkedOut]

I had the liner off the truck when it happened.
I looked in the pockets by the fog lights too.
I’m telling you, it dissolved.

 

[Jroby42]

I had the liner off the truck when it happened.
I looked in the pockets by the fog lights too.
I’m telling you, it dissolved.

I also have done it, try these on Amazon, direct fit.

 

[Jroby42]

I also have done it, try these on Amazon, direct fit.

Or these if you want the phillips head.