Aftermarket radio no sound after battery disconnect

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tf79

Member
Joined
Aug 29, 2024
Posts
31
Reaction score
23
Hey guys I bought this 04 Yukon Denali with an after market radio installed, factory Bose system. Rear speakers worked so I figured the fronts were just blown. I did some work to the truck and had to disconnect the battery, but when I reconnected it the radio is acting like it’s working, but no sound at all. I pulled the console to check it all and found out that the previous owner bypassed the amp and wired speakers directly to head unit. But one plug is still connected to amp. Is there something I have to reset for the speakers to work again? Thanks
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,490
Reaction score
39,851
Location
Stockton, Ca.
Hey guys I bought this 04 Yukon Denali with an after market radio installed, factory Bose system. Rear speakers worked so I figured the fronts were just blown. I did some work to the truck and had to disconnect the battery, but when I reconnected it the radio is acting like it’s working, but no sound at all. I pulled the console to check it all and found out that the previous owner bypassed the amp and wired speakers directly to head unit. But one plug is still connected to amp. Is there something I have to reset for the speakers to work again? Thanks
might need to do some kind of reset on the radio or have you tried disconnecting the battery again?
 

homesick

Full Access Member
Joined
Sep 19, 2018
Posts
1,182
Reaction score
2,889
On mine, the installer ran a separate power wire from the new amp to the battery. The mechanic failed to reconnect it, so the head unit acted normal, but there was no sound.

I'd check fuses too.

joe
 
OP
OP
T

Tf79

Member
Joined
Aug 29, 2024
Posts
31
Reaction score
23
might need to do some kind of reset on the radio or have you tried disconnecting the battery again?
Yes I have and it did the same thing. It’s got to be a reset of some sort because it worked when I bought it
 
OP
OP
T

Tf79

Member
Joined
Aug 29, 2024
Posts
31
Reaction score
23
On mine, the installer ran a separate power wire from the new amp to the battery. The mechanic failed to reconnect it, so the head unit acted normal, but there was no sound.

I'd check fuses too.

joe
I’ll check but it’s so weird that it worked, I disconnected the battery, then stopped working. I’m gonna dive into it tonight
 

Forum statistics

Threads
132,712
Posts
1,873,039
Members
97,533
Latest member
Mitchellbrandon52
Top