Alarm and Remote Start

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

steve k

TYF Newbie
Joined
Sep 23, 2010
Posts
5
Reaction score
0
So if I undertand it correcty the DLPKGM will work with the Yukon 2001 ? but is not listed in their manuals.
 

tom q

Full Access Member
Joined
May 22, 2009
Posts
84
Reaction score
1
Location
Modesto, CA
can you install a DEI smartstart module to any alarm? I have an autopage RS 730

---------- Post added at 11:13 AM ---------- Previous post was at 11:09 AM ----------

I installed my autopage and did not cut the starter wires. In other words, my alarm does not do the engine kill. But since I am using a module, once somebody opens the door, the factory alarm kicks in disabling the engine start anyway. So doors and windows are controlled by factory alarm and autopage, while engine disable is handled by factory.

I just didn't want to mess with the ignition wires.
 

Forum statistics

Threads
132,267
Posts
1,865,047
Members
96,830
Latest member
YukonLover

Latest posts

Top