Exactly which shocks did you use?
coil springs?
how low are you?
We need pics, details, pics, reviews... oh and PICS
ha ha ha...
In time grasshopper, in time i will answer all questions.
For a quick response:
For pics, honestly none really of the install, its quite simple, bolt on mostly. With the exception of cutting off the corner of the bumpstop bracket and the little section of frame right there (as are in atomics pics) If you look at atomics pics, mine look identical.
But one thing to note, i did not drill holes for the bolts for the upper brackets. I saw no way to do it (to bolt them on the backside) as the motor mount is right there on the drivers side. So i just welded them. I think they are only about 3/8 thickness anyway. Not a big deal to me.
Pics, parts used (which is exactly as Atomic listed all of them will be used if you use the procomp adapter, as no bushings for stud mount have held up at this time) details, reviews, etc.. hopefully tomorrow.
And height, i am at the same exact height as before i started the install. 32 ground to fender or 16.5 center wheel to fender bottom. Not a difference at all. But the only negative is i can only go up not any lower till someone finds a bushing that works for the stud mount. But at this present time, I have absolutely no complaints.
