Hawgdriver
TYF Newbie
- Joined
- Dec 5, 2010
- Posts
- 10
- Reaction score
- 0
Have any of you used the NavVideo setup in order to us your factory Nav Unit as your reverse camera video? It works with Touchscreen(GM4) AND Non-Touchscreen Units (GM5)
http://www.navvideo.com/navvideo-models-nv_rgb_gm5.asp
http://www.navvideo.com/downloads/Install_NV_RGB_GM.pdf
If so, or if not, with this setup where would you recommend you wire the wiring connections so the system works when placed in reverse AND with a toggle switch for anytime use? There seems to be a lot of talk with the A-Piller wire and the driver's lower left fuse box (green wire). I am not sure which is best for my intentions.
Thanks for sharing you experiences!
http://www.navvideo.com/navvideo-models-nv_rgb_gm5.asp
http://www.navvideo.com/downloads/Install_NV_RGB_GM.pdf
If so, or if not, with this setup where would you recommend you wire the wiring connections so the system works when placed in reverse AND with a toggle switch for anytime use? There seems to be a lot of talk with the A-Piller wire and the driver's lower left fuse box (green wire). I am not sure which is best for my intentions.
Thanks for sharing you experiences!
Last edited: