Auto stop perminant disable?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ChemEng

Full Access Member
Joined
Dec 26, 2021
Posts
111
Reaction score
64
Just ordered a '22 tahoe with 6.2L. It looks like they are putting the auto start/stop back in now (although still no heated steering wheel). Has anyone installed this thing on a '22?


I absolutely hate having my engine turn off every time I stop.
 
Last edited:

Micahsd

Full Access Member
Joined
May 6, 2021
Posts
335
Reaction score
153
Haven’t tried that but it looks like a cool idea. Guessing it just sends an auto-press of that Start/Stop Disable button.

That’s a lot better than hitting the button each time. :)
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,211
Reaction score
39,282
Location
Stockton, Ca.
they just wired up a micro-switch to plug-n-play same thing that is used to bypass in motion video on aftermarket head units
so instead of you having to hit the button the electronic switch does it each time the power is cycled
 

DougAMiller

Full Access Member
Joined
Mar 10, 2016
Posts
489
Reaction score
791
Location
Colorado
Pretty simple circuit. I designed and built one for the TCS on my 2002 Trans Am so the traction control would be off by default. I just created a delayed pulse circuit to replicate pushing the button right after starting the engine. $100 seems pretty expensive for what is about $2 in parts. It's simple enough that you really don't even need a circuit board, just solder the components to each other. This is what my circuit looked like.

1640635328413.png
 

Pifemaster

TYF Newbie
Joined
Oct 11, 2021
Posts
29
Reaction score
19
Just ordered a '22 tahoe with 6.2L. It looks like they are putting the auto start/stop back in now (although still no heated steering wheel). Has anyone installed this thing on a '22?


I absolutely hate having my engine turn off every time I stop.
I ordered and installed that exact device for my 2021 Yukon Denali. It worked flawlessly. It remembers the position of the switch each time you turn the vehicle off and then returns it to that position when you re-start the vehicle. I traded my 2021 in on a 2022 and the new vehicle was built without the auto start/stop, so I did not need it on the new vehicle. I highly recommend that company. They were great to deal with.
 
OP
OP
C

ChemEng

Full Access Member
Joined
Dec 26, 2021
Posts
111
Reaction score
64
Thanks guys, i'll order one then. I might also get one for my wife's Odyssey, but the install looks a bit more involved.

Im not sure why they had to waste a microchip on that stupid feature. I want warm hands and HD radio... oh and a build date... still waiting for a build date.
 
Last edited:

Kpwweb

Full Access Member
Joined
Dec 11, 2015
Posts
698
Reaction score
302
I ordered and installed that exact device for my 2021 Yukon Denali. It worked flawlessly. It remembers the position of the switch each time you turn the vehicle off and then returns it to that position when you re-start the vehicle. I traded my 2021 in on a 2022 and the new vehicle was built without the auto start/stop, so I did not need it on the new vehicle. I highly recommend that company. They were great to deal with.
I ordered and installed this device as well. I can confirm it works exactly as described. It is a great device and works flawlessly.

Install took about 20 minutes. Easily done.

Kudos to whomever thought of this. I don’t think it is a micro switch. Seems more like an electronic latching relay.
 

Kpwweb

Full Access Member
Joined
Dec 11, 2015
Posts
698
Reaction score
302
Pretty simple circuit. I designed and built one for the TCS on my 2002 Trans Am so the traction control would be off by default. I just created a delayed pulse circuit to replicate pushing the button right after starting the engine. $100 seems pretty expensive for what is about $2 in parts. It's simple enough that you really don't even need a circuit board, just solder the components to each other. This is what my circuit looked like.

View attachment 358984
It is only about $5 or so in parts, but for plug’n play and simple installation, it was definitely worth it for me. It looks stock, complete with cloth-taped wire loom. Customer service was great and the YouTube video helped.
 

Tayers

TYF Newbie
Joined
May 29, 2021
Posts
12
Reaction score
4
This may be a naive question, but does anyone know if adding a device like this impacts the warranty? I’ve had two major repairs already to my 2021 Tahoe with under 20K miles.
 

CXXX

TYF Newbie
Joined
Jul 24, 2018
Posts
16
Reaction score
11
Location
Thompsons Station, Tennessee
I installed the same thing on my 2021 GMC Sierra 6.2, works great. I like it because it keeps the Auto Stop functional not just a disable device. That way you don't have a "dead" switch.
 

Forum statistics

Threads
132,325
Posts
1,866,015
Members
96,926
Latest member
gb24
Top