Big win with EVAP system

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

wheats

TYF Newbie
Joined
Aug 10, 2021
Posts
1
Reaction score
1
Hope this helps someone. 2008 5.3 here. So after replacing canister, both solenoids purge valves and dropping the tank to blow out the lines I still had the CEL. I started checking fuses under the hood and noticed a square fuse/relay missing its top clear cover. #72 “left bussed electrical center 2”. I replaced it and CEL shut off. If someone could please confirm this fuse/relay linked to the EVAP system would be appreciated. Thanks.
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
7,846
Reaction score
10,833
Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

I cannot personally assist you with your issue, but other members of this Forum much more knowledgeable than me in this area will chime in.

@Doubeleive @OR VietVet @wjburken
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
27,241
Reaction score
41,206
Location
Stockton, Ca.
Hope this helps someone. 2008 5.3 here. So after replacing canister, both solenoids purge valves and dropping the tank to blow out the lines I still had the CEL. I started checking fuses under the hood and noticed a square fuse/relay missing its top clear cover. #72 “left bussed electrical center 2”. I replaced it and CEL shut off. If someone could please confirm this fuse/relay linked to the EVAP system would be appreciated. Thanks.
you could check the gm upfitter guide, they have decent electrical diagrams free
 

Forum statistics

Threads
133,823
Posts
1,891,735
Members
99,147
Latest member
Allthingschevy12
Top