Bully Dog is SWEEEET!

[yolo]

I installed the new bully dog programmer on my NBS Yukon 5.3 today. It makes all the difference. It took about an hour (30 mins manual work and 30 mins going through download). I would highly recommend it.

 

[Nfamous60]

what other mods do you have on your trucc i was looking at this too but was more leaning to a BB tune instead..also HP gains.

 

[wmgood64]

I have a Bully dog programmer too! I set to preformance mode on 07 lt3 5.3 silvy but when you floor it and just as it shifts the serpitine belt squeals a little bit drives me nuts!!I also have Corsca cat back touring,Volant Cai with power tube,Jet MAFS,Throttle body spacer It has 24,000 miles so i think the belts ok ! The last thing i added was the bully dog program and it didnt squeal prior!! Any suggestions???

 

[BlueTahoe2001]

I installed the new bully dog programmer on my NBS Yukon 5.3 today. It makes all the difference. It took about an hour (30 mins manual work and 30 mins going through download). I would highly recommend it.

You have the new GT Gas Tuner W/ Driving Coach and the full monitor system?

 

[yolo]

You have the new GT Gas Tuner W/ Driving Coach and the full monitor system?

Yes. They were just released last week. I am building this Yukon for Truckin' Magazine. You will see several write ups over several issues. When it is complete, you will see a full feature photo shoot. I have added an Airaid intake and throttle body spacer, and a yellow top Optima. This is a picture of the install in my Yukon


I have build a few vehicles and you can see them on my website. www.MarkBarbee.com

The other mods will be: custom hood (I am making a reverse cowl), leather, factory nav with memphis audio system and hidden 12 inch sub in rear driver side panel, Belltech drop kit, painted 22's on Toyo Tires, custom paint, t rex grille, IPCW lights, and more

 

[wmgood64]

Damn!! They are some sweet rides!!!!!

 

[BlueTahoe2001]

Yes. They were just released last week. I am building this Yukon for Truckin' Magazine. You will see several write ups over several issues. When it is complete, you will see a full feature photo shoot. I have added an Airaid intake and throttle body spacer, and a yellow top Optima. This is a picture of the install in my Yukon
View attachment 1211

I have build a few vehicles and you can see them on my website. www.MarkBarbee.com

The other mods will be: custom hood (I am making a reverse cowl), leather, factory nav with memphis audio system and hidden 12 inch sub in rear driver side panel, Belltech drop kit, painted 22's on Toyo Tires, custom paint, t rex grille, IPCW lights, and more

Very cool! Sweet rides as well! Anymore specific details you could point out on the Bully Dog? Thats my next mod if I can get some money up!

 

[yolo]

Very cool! Sweet rides as well! Anymore specific details you could point out on the Bully Dog? Thats my next mod if I can get some money up!

Very easy install. The hardest part is getting the power wire through the firewall I took power from the 4wd fuse because I dont have 4wd.

 

[BlueTahoe2001]

Very easy install. The hardest part is getting the power wire through the firewall I took power from the 4wd fuse because I dont have 4wd.

Cool, Now, How did you plug it into the OBDII? Did you run it down behind the A-Pillar an then behind the dash and plug it in or?

 

[yolo]

Cool, Now, How did you plug it into the OBDII? Did you run it down behind the A-Pillar an then behind the dash and plug it in or?

Like this. The directions from Bully Dog are great!