coil over conversion installed

[04blackout]

Do you have the rear LCA relocate brackets and the sway bar ends links to position sway bar right. yep All bolts tight front and rear? yessirHow are your shock towers holding up? theyre holding up great! just checked them yesterday morning, to make sure nothing weird was going on and all looks goodHave you got an alignment yet could have something to do with a high speed sway??? no alignment yet, still need to do my camber kit. i suppose that could be the culprit

I was afraid that you'd lost interest once you got the conversion done since we hadn't seen any updates from you. I'm glad your back with us.

nah, just been so busy with everything else... work, family, house, my other car, now the little one has strep, and the dog just blew out her ACL ($1200 repair bill)

 

[Tahoewhat]

Well since you have the panhard, Im not sure what would be causing sway in the rear. Even before i did the adj. lca and uca my tahoe did not sway. I would say ask Norcal - Tony and see what he thinks it may be.

Good to hear that Iregret has some miles on the new bushings. Need to go check out his thread.

 

[NORCAL SS]

what set up do you have in rear again?

 

[Tahoewhat]

what set up do you have in rear again?

Look at that service, just say his name and he appears. lol.

 

[NORCAL SS]

my wifes due on wednesday so ya ill be on computer a lot not doing anything till that baby comes lol

 

[digitalfiend]

Dude, that's awesome. My wife is due with our third bundle of joy in August. Good luck to you guys. You know we expect photos of the new arrival in a slammed stroller with bling for rims, right?

my wifes due on wednesday so ya ill be on computer a lot not doing anything till that baby comes lol

 

[NORCAL SS]

yah its our 3rd also. Plus she told me yesterday that if she doesnt like the new esky that I can get the z06 new vett. So we shall see what happens.

 

[04blackout]

what set up do you have in rear again?

5305 with helper bags, rear hardware kit, free travel mod, spohn panhard bar

 

[NORCAL SS]

What shocks?

What are rear bushings torqued at for swaybar links?

 

[04blackout]

What shocks?

What are rear bushings torqued at for swaybar links?

qa1 adjustables and I didnt actually put a torque wrench on them, but I used a real short ratchet and only got them half ass tight, used nyloc nuts and a ton of lithium grease