Dr P
TYF Newbie
- Joined
- Jun 6, 2016
- Posts
- 2
- Reaction score
- 0
Sorry guys I'm not sure how to post on here. But I was wondering if on a 2004 Chevy tahoe do i need to drop the oil pan to remove the oil pump or can I just remove the timing cover??
Cold air intake? Yea or nay?
- Thread starter Jay R Lawson
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Turn off the vigilink thing, that's what's messing it up. On the bottom is says "why am I seeing this" click on that. Then is should say "click here" to disable then you can go right to the page
Shunto
Full Access Member
Link worked for me.. I've never heard of that brand before.... Ya gets what you pay for .. it's never proven me wrong yet.
Etraeger
Full Access Member
Does it really matter how "cool" it looks if its going to be hidden under your hood anyway? I talked to my mechanic who has dyno'd CAI's and found no HP increase. I didn't ask him about fuel economy. It does increase engine noise he said.
this is the answer.
CAIs give you a power "boost" due to colder air, problem with our trucks is that we ALREADY have a CAI in the stock box. You can gain a modest increase with a better tube (less restrictions) and a hi-flow filter. I bought a cheap CAI kit, and connected it to my stock box, because I didn't want to (or have) $150 dollars for an intake tube.
Has anyone experimented with a functional cowl induction hood? I'd be real curious to know if there is any measurable power or economy to be gained doing this. Yeah I know they look cool but it would be better if they would actually do some good.
Msalinas408
Full Access Member
- Joined
- Jul 30, 2016
- Posts
- 104
- Reaction score
- 90
Has anyone had any experience with aFe Power Cold Air Intakes?
Tacky
Member
- Joined
- Apr 11, 2012
- Posts
- 38
- Reaction score
- 9
Yes, pan has to come off.
They just look good but do nothing as far as performance since our trucks draw cold air from the fender.
I know it would take some additional hardware to get it plumbed into the filter box but I'd like to hear from someone who did it. This would allow the engine to draw air from the pressure bubble that forms at the base of the windshield while at highway speeds. Some of the muscle cars of the 60s and 70s had functional cowl induction. NASCAR uses the same theory but taps into the defroster intake just below the windshield. This can cause a bit more noise in the cockpit though.
Similar threads
