Crankshaft position sensor went bad can it get me home?

[Tonyv__]

Will replacing the crank sensor require a relearn?

Yes but can be driven without the relearn

edit. Maybe not iirc I don’t think my CKP not learned code showed up until I replaced the ECM. But even when the code was present, i was able to drive it until I did the learn

 

[Fless]

If it runs after the CKP is replaced, just plan to do the relearn as soon as you can. Not doing it has been related to general misfires (P0300) in certain cases. Best to do it when you're able, but not initially required.

 

[Trey Hardy]

Thanks fellas yall are awesome as always!

 

[skpyle]

Starter




CKP after wiggling starter out of the way.


When I did mine, the starter put up a fight. There is very little wiggle room, and you have to hold your mouth just right to get the starter to move where you want it to. As well, remove the plastic dust shield around where the starter enters the bellhousing for necessary access.


Good Luck!

 

[Trey Hardy]

View attachment 431906
Starter



View attachment 431907
CKP after wiggling starter out of the way.


When I did mine, the starter put up a fight. There is very little wiggle room, and you have to hold your mouth just right to get the starter to move where you want it to. As well, remove the plastic dust shield around where the starter enters the bellhousing for necessary access.


Good Luck!

Thank you!

 

[skpyle]

Thank you!

You are quite welcome!

 

[donjetman]

Got a pic for the crankshaft position sensor? lol I thought that was it but it was the cam sensor on the front I guess by the balancer

no haven't done that one (yet).