Decided to bag it 2006 yukon xl

[rcbeau1911]

Finally going back to air miss my old obs that was bagged and bodied.

didn't really find alot on doing the rear or how far I can go without cutting floor.

plan is pretty much bag the front first picked up a complete front end setup cheap local. Guy returned truck to stock suspension to sell. It drop spindles arms mounts blah blah.

Rear since I can't really find any info. Got some trailing arms that will clear frame. So pretty much the plan is to cut until the axle hits the frame or the center chunk hits the floor. After that make sure driveshaft has clearance install some bumpstops.

Fab a cantilever lever setup. Want to avoid BOA.

Would love to lay frame but not wanting to cut floor at all. As it'll steal airspace I could deal with like 2 inches possibly 3 but I don't think that'll be enough not to mention I'm leary of notching frame with 3000 pounds of stereo in the back with occasional 6x12 trailer on the hitch.

Any pictures of rear setups will be greatly appreciated or any estimates on how close to laying out ill be. Be on 26's

 

[Young28]

ignore.

 

[rcbeau1911]

to bag on tires maybe 1500-3k depends on if you are doing it your self. You can tow a 6x12 trailer just fine.

You lost me by quoting price. Not sure where that came from

 

[Young28]

Yep, i had alot going on yesterday morning and i guess i misread that. My fault.

---------- Post added at 05:21 AM ---------- Previous post was at 05:18 AM ----------

 

[01rgncy]

Im in the same boat here. Trying to get the rear as low as I could without cutting. So far I have it about 1/2" from the top of the rear tire. Im working with BOA but would like to come up with a diferent setup. So far the problems I see are pan hard mounts will hit frame where cabin meets the body. Can fab a new one moved slightly farther back or delete stock panhard and go aftermarket. Also the same reason I didnt want to cut too. I have a c-pillar wall and that would steal airspace from my box. Another inch and Ill be laying steps all around though so not to far off.