Door Sills

[LTLux]

I just noticed on some vids on youtube that most 2010 and up LTZ's have door sills that say Chevrolet on them. Does anyone know if they are illuminated or just regular door sills?

I have an 07 LT and wanted to get some of these if they are a direct fit.

 

[THE YETI]

They do not illuminate.

 

[LTLux]

Thanks!

I was able to find what I think are the right part numbers for titanium. I looked on gmpartsdirect and I think the #'s are:

left front 15804103
right front 15804106

I will call a dealership when they open to see if they are the ones that say Chevrolet.

 

[NathanJax]

They make some that are illuminated though...

http://www.tahoeyukonforum.com/forum/showthread.php?t=39605




They are about $400 at crateenginedepot.com here...

Denali - http://www.crateenginedepot.com/Door-Sill-Plates-Front-19202873-P15772C798.aspx

GMC - http://www.crateenginedepot.com/Door-Sill-Plates-Front-19171555-P15445C780.aspx

Chevrolet - http://www.crateenginedepot.com/Door-Sill-Plates-Front-19171554-P15444C780.aspx


and Robbie (superchargedss) can get them for you as well.

 

[iwaslowr]

Do they make these for the second row sills as well?

 

[NathanJax]

Do they make these for the second row sills as well?

No. The sills are too small to really fit anything...

 

[Sancho]

You could probably get a bowtie in there, but that's about it. Maybe an "SS," if that were an option.

 

[LTLux]

I saw those but I just dont see spending $400 for door sills.

---------- Post added at 04:30 PM ---------- Previous post was at 04:25 PM ----------

On a different note, does anyone know which actuator is under the passenger side of the dash, to the left of blower resistor? I was going to change it today and I cannot get that 2nd bolt out! I must not have the right tool but I don't see how anything can fit in that tight spot.

By the way, I have an 07 Tahoe LT, if that helps.

 

[iwaslowr]

No. The sills are too small to really fit anything...

You could probably get a bowtie in there, but that's about it. Maybe an "SS," if that were an option.

The front, rear and liftgate sill all have the aluminum insert. It would be great if these illuminated pieces were offered for each sill...

Front doors


Rear doors


Liftgate

 

[NathanJax]

The front, rear and liftgate sill all have the aluminum insert. It would be great if these illuminated pieces were offered for each sill...

Found something new to put on my list...


Wouldn't by chance want to take those off and give me the part numbers, would ya?