I want to go lower

[NORCAL SS]

ok if you have 2 inch drop spinldes I would get the adjustable belltech drop struts.

in rear you would do the tb springs/djm hardware kit/belltech shocks/new bumpstops

$715 shipped to your door.

 

[Jimmyp19]

ok if you have 2 inch drop spinldes I would get the adjustable belltech drop struts.

in rear you would do the tb springs/djm hardware kit/belltech shocks/new bumpstops

$715 shipped to your door.

for the rear tony, what would that give me for a drop?

I am assuming at full squish, the front would be 4

 

[NORCAL SS]

for the rear tony, what would that give me for a drop?

I am assuming at full squish, the front would be 4

looking at your truck rear should come down about 2.5 to 3 inches.

 

[Jimmyp19]

tony, thanks for the help, is there a link to what I need on your page?

I know what the front shock will look like and what is needed to install them, but what about the back....also with all mentioned above installed, I have two questions

one: Autoride in the rear will this be affected? Do I need to just rip it out

Two: 4x4, i still need this seeing i live in NH...problems?

thanks

 

[NORCAL SS]

oh if you have autoride and you want to go lower then in rear do this
http://www.tbssowners.com/store/index.php?act=viewProd&productId=87

and in front you can take that spacer out of your current arnott shocks.


now in front if you want to get rid of the autorid here you go

Here is dylans truck with the 3/5 kit i sold him and the wheels I sold him.




---------- Post added at 08:37 AM ---------- Previous post was at 08:35 AM ----------

btw i can see how the spindles pushed out your front tires they are sticking out the wells. Just be careful if you go lower that it doenst hit the front fenders and warp them.

 

[Jimmyp19]

now in front if you want to get rid of the autorid here you go

Here is dylans truck with the 3/5 kit i sold him and the wheels I sold him.

awesome.....I feel like you were going to put a link in there and forgot....

 

[NORCAL SS]

3/5 kit and get rid of autoride
http://www.tbssowners.com/store/index.php?act=viewProd&productId=140

 

[Jimmyp19]

if i do that kit, I need to remove the drop spindles in the front and replace them with the stock ones right?

and do the arms have greasable joints? or do they need to be replaced when they go bad?

 

[NORCAL SS]

if i do that kit, I need to remove the drop spindles in the front and replace them with the stock ones right?

and do the arms have greasable joints? or do they need to be replaced when they go bad?

forgotyou had spindles

so you would need
adjustable belltech drop struts.

in rear you would do the tb springs/djm hardware kit/belltech shocks/new bumpstops

and forgot to add the front camber bushing kit for alignment

$785 shipped to your door.


This will get rid of the autoride set up.

 

[Jimmyp19]

It doesnt bother me to remove the spindles if the other kit is the way to go (I need to replace my lowers anyways they are shot and I am looking for a Tahoe for my wife, so I could use the drop spindles on the vehicle)...

Thoughts? I know I am monopolizing your time and for that I apologize.

jimmy